Freescale Semiconductor MPC8349E User Manual page 20

Hardware Preparation and Installation
6. If you will be working with a back plane, and wish GETH signals to traverse either the
back plane connection, or the front plane optical connection, connect the two GETH
sockets on the MPC8349E MDS Processor Board with sockets on the PIB board as shown
in Figure 2-8 and Figure 2-9.
Note that if you do not do this, you can still connect GETH cables directly to the Processor
board's sockets, if they are accessible in your laboratory configuration.
Processor Board on PIB
GETH Sockets
Figure 2-8 Insert GETH interconnecting cables to GETH sockets on Processor board
20 MPC8349E MDS Processor Board User's Manual
GETH Inter-
connecting
Cables
Freescale Semiconductor