Cleaning The Chimney - Osburn Stratford Installation And Operation Manual

Osburn wood fireplace
Table of Contents

Advertisement

Stratford Fireplace Installation and Operation Manual
not covered under warranty. Have your chimney system cleaned by a professional chimney sweep. 
Use a plastic or steel brush. 
Contact  your  local  municipal  or  provincial  fire  authority  for  information  on  how  to  handle  a 
chimney fire. Have a clearly understood plan to handle a chimney fire. 
5.2.3 CLEANING THE CHIMNEY 
Chimney  cleaning  can  be  a  difficult  and 
dangerous  job.  If  you  don't  have 
experience  cleaning  chimneys,  you  might 
want to hire a professional chimney sweep 
to  clean  and  inspect  the  system  for  the 
first  time.  After  having  seen  the  cleaning 
process,  you  can  decide  if  it  is  a  job  you 
would like to take on. 
The  most  common  equipment  used  are 
fibreglass  rods  with  threaded  fittings  and 
stiff plastic brushes. The brush is forced up 
and down inside the chimney flue to scrub 
off the creosote. 
The  chimney  should  be  checked  regularly 
for  creosote  build‐up.    Inspection  and 
cleaning  of  the  chimney  can  be  facilitated 
by removing the baffle. 
Do  not  expect  chemical  cleaners  to  keep 
your chimney clean. 
The rain cap can be removed for inspection and/or cleaning of the chimney. 
The chimney should be swept following these steps: 
1) Remove the fire baffle and air tubes. 
2) Remove the rain cap. 
3) Sweep the chimney. 
4) Clean the inside of the firebox. 
5) Re‐install the baffle, the air tubes and the rain cap. 
CAUTION:   OPERATION OF YOUR STRATFORD WITHOUT THE BAFFLE MAY CAUSE UNSAFE AND 
HAZARDOUS TEMPERATURE CONDITIONS AND WILL VOID THE WARRANTY. 
32 ______________________________________________________________________

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stratford and is the answer not in the manual?

Questions and answers

Table of Contents