Connecting A Dvd Player/Recorder - Yamaha YSP-30D Owner's Manual

Connections

Connecting a DVD player/recorder

Connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL INPUT jack on
this unit. When you connect this unit to your DVD/VCR combo player/recorder, connect the analog audio output jacks on
your DVD/VCR combo player/recorder to the AUX 1 AUDIO INPUT jacks on this unit in addition to the coaxial digital
audio connection.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 17).
Notes
• Check that your DVD player/recorder is properly set to output Dolby Digital and DTS digital audio signals. If not, adjust the system
settings of your DVD player/recorder. For details, refer to the operation manual supplied with your DVD player/recorder.
• If your DVD player/recorder does not have a coaxial digital output jack, make an optical digital audio connection instead (see
page 24).
ANTENNA
DOCK
Video signal to the TV
Audio pin cable
Digital audio pin cable
20
En
AUDIO INPUT
AUX 1 TV/STB SUBWOOFER
*
For the DVD/VCR combo
player/recorder
connection
R L
Analog
audio
output
Audio
Rear panel of this unit
OUT DIGITAL INPUT
VIDEO AUX 2 DVD
COAXIAL
OPTICAL
AUX 1 TV/STB
DVD player/recorder
Coaxial
digital
output