Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
AND
OWNER'S MANUALS
®
OUTDOOR PATIO HEATER
Model 920-0010
A02Y07P-2
Warning: For outdoor Use Only
IMPORTANT
Read this manual carefully before assembling, using or servicing this
heater. Keep this manual for future reference. If you have questions about
assembly, operation, servicing or repair of this heater, please call Nexgrill
Industries., Inc at 1-866-984-7455
1
Advertisement
Table of Contents
Related Manuals for Nexgrill 920-0010
Summary of Contents for Nexgrill 920-0010
-
Page 1: Installation Instructions
Warning: For outdoor Use Only IMPORTANT Read this manual carefully before assembling, using or servicing this heater. Keep this manual for future reference. If you have questions about assembly, operation, servicing or repair of this heater, please call Nexgrill Industries., Inc at 1-866-984-7455... -
Page 2: Table Of Contents
Table of Contents Table of contents & Warning…………………………2 -3 Tools and parts needed for assembly………………….4 Assembly Instruction…………………………………..5-10 Gas Requirement & Leak testing……………………...11 Safety Checks……………………………………………12 Location heater for use………………………………13-15 Storage burner removal…………………………………16 Burner installation / Pilot cleaning……………………..17 Trouble Shooting…………………………………………18 Part List……………………………………………………19 Limited Warranty…………………………………………20 General Safety Information This manual contains important information about the assembly, opera-... - Page 3 PRECAUTIONS Do not use this space heater in an explosive atmosphere. The LP tank should be turned off when the heater is not in use Keep heater away from areas where gasoline or other At least once a year, the unit should be inspected for the presence flammable liquids or vapors are stored.
-
Page 4: Tools And Parts Needed For Assembly
Tank hook Ø 3/16 x 4 Flat Washer(4) Reflector Ø1/4” x 82mm Threaded Ends Stud (1) For Service Questions Replacement parts or other assistance, Please call Nexgrill Customer Service Hotline at: Nexgrill Industries, Inc 280 Machlin Court, City of Industry, CA91789... -
Page 5: Assembly Instruction
Assembly Instruction STEP 1. Attach Pole with Support Bracket ● Put the Pole with Support Bracket into the Tank hole. ● Secure the Pole with 4 pcs the 1/4” Flat Washers, 1/4” Lock Washers and 1/4” Nuts STEP 2. Secure the Granite Table ●... - Page 6 Assembly Instruction STEP 3. Attach the Emitter Grid ● Put the Emitter Grid on the Emitter base. ● Secure the Emitter Grid with 4pcs 3/16” x 10mm Truss Head Screws as shown in the diagram to the left. STEP 4. Attach the Post ●...
- Page 7 Assembly Instruction STEP 5. Heater Body Assembly ● Put the Post into the hole of Granite Table. Please make sure that the Gas Hose End and two Wires go through the hole and can be reached from the interior of the Base Housing. ●...
- Page 8 Assembly Instruction STEP 7. Attach the Regulator ● Attached and turn the flare adapter hose Regulator assembly to the flare fitting on the Gas Hose with adjustable wrenches. STEP 8. Connect the Igniter Wires ● There should be two wires hanging down in the Base Housing.
-
Page 9: Reflector
Assembly Instruction STEP 9. Reflector Assembly ● Align the three pieces of the Reflector as shown. ● Assemble using three Reflector Connecting Poles and 6 pcs 5/32” x 8mm screws. Insert the Reflector Connecting Poles into the curled edge of the reflector and align the screw holes with the holes in the Reflector. -
Page 10: Assembly Instruction
Assembly Instruction STEP 12. Gas Tank Assembly ● Open the Tank door, fit the bottom of the gas tank into the hole in the bottom of the Tank Enclosure. Note that the valve connection on the gas tank should be facing directly towards the door opening. -
Page 11: Gas Requirement & Leak Testing
GAS REQUIREMENTS & LEAK TESTING NEVER CONNECT AN UNREGULATED GAS SUPPLY TO THE HEATER PRECAUTIONS A dented, rusted or damaged propane Periodically check the whole gas system for tank may be hazardous and should be leaks or immediately check if the smell of gas checked by your tank supplier. -
Page 12: Safety Checks
SAFETY CHECKS STEP 1: 1. Check connection from regulator to propane Step 1. tank connection. Remember, the connection is a left-hand thread. (See diagram for Step 1) 2. Check all connections on the hose regulator assembly (See diagram for Step 1) 3. -
Page 13: Location Heater For Use
LOCATING HEATER FOR USE BE CAREFUL: When certain materials or items are left under this heater, while in use, they will be subjected to radiant heat and could be seriously damaged. ● The unit is designed for heating outdoor patios, decks, spas, pool and working areas. ●... - Page 14 LOCATING HEATER FOR USE BEFORE TURNING THE GAS SUPPLY ‘ON’: Visually inspect the hose assembly for evidence of excessive abrasion cuts or wear. If the hose leaks it must be replaced prior to use. Any hose replacement must be specified by the manufacturer. See parts list or details, then call Customer Service hotline.
- Page 15 LOCATING HEATER FOR USE WHEN HEATER IS ON: The emitter screen will become bright due to intense heat. The color is more visible at night. The burner will display tongues of blue flame. These flames should not be all yellow or produce thick black smoke, indicating an obstruction of airflow through the burners.
-
Page 16: Storage Burner Removal
STORAGE BURNER REMOVAL WHEN STORING THE HEATER THE CONNECTION BETWEEN THE PROPANE TANK AND THE HEATER MUST BE DISCONNECTED AND THE PROPANE TANK REMOVED FROM THE ENCLOSURE AND STORED INDOORS IN A WELL VENTILATED AREA OR IN ACCORDANCE WITH CHAPTER 5 OF THE STANDARD FOR THE STORAGE AND HANDLING OF LIQUEFIED GASES, ANSI/NFPA 58-1998. -
Page 17: Burner Installation / Pilot Cleaning
BURNER INSTALLATION / PILOT CLEANING BURNER INSTALLATION Install the burner assembly by reversing the four (4) steps used for disassembly making certain the burner assembly stands centered when complete. After reassembly, the heater should be test fired. Observe the burner flame. The flame should be blue with a slight yellow tipping. -
Page 18: Trouble Shooting
TROUBLE SHOOTING Problem Possible Causes Correction Pilot won’t Air in gas line Purge gas line and repeat ignition operation light Lowe gas pressure Check gas pressure Gas line turned ‘OFF’ Turn ‘ON’ gas supply Blockage in gas line Check gas passageway Pilot orifice is clogged Call a qualified person Control knob not in pilot position... -
Page 19: Part List
PARTS LIST Description Description Reflector Nut Tank Cover Threaded Ends Stud Back Panel Reflector Dome Cap Gas Tank Support Reflector Plate Side Panel, Left Reflector Wheel Axle Emitter Grid Wheel Main Burner Axletree Support Assembly Plate Emitter base Side Panel, Right Emitter Screen, Left Door Latch Bracket Emitter Screen, Right... -
Page 20: Limited Warranty
Our obligation under this warranty is limited to repair or replacement at our option of the product during the warranty period. The extent of any liability of Nexgrill Industries, Inc. under this warranty is limited to repair or replacement. This warranty does not...
Need help?
Do you have a question about the 920-0010 and is the answer not in the manual?
Questions and answers