Common 2. Installation Normally Closed OFF-Detect Install the DEH 3000R remote sensor in a central area of the structure where it will sense the relative humidity of the Damper Dehumidifier structure accurately. Do not install the remote sensor where it...
WARNING! provides the ability to control fresh air ventilation using DO NOT ALLOW THE YELLOW the ventilation timer function of the DEH 3000R and WIRE FROM THE ULTRA-AIRE DEHUMIDIFIER TO CONTACT the terminal labeled “DMP” on the DEH 3000R (See THE RED OR WHITE WIRES FROM THE ULTRA-AIRE Section 3.8).
(usually Black) must be attached to the "COM" sensor 3. Run a wire from the Red terminal on the thermostat to the terminal between "ON-D" and "OFF-D" on the DEH 3000R. TO A/C NO (Normally Open) terminal on the DEH 3000R.
After checking the wiring, this short test will confirm proper vent mode to “CLOSED”. hook-up. WARNING! 1. Install front cover of the DEH 3000R; connect the top first, DO NOT MAKE ANY OTHER then the bottom. CONNECTIONS OR TRANSFORMER DAMAGE MAY RESULT.
4. Press the “CLOCK” button again and AM or PM will flash. leave the control alone and don’t touch any buttons for 10 Use the “RH” buttons to change the value. DEH 3000R Dehumidifier & Ventilation System Controller Installation, Operation & Service Manual...
50% relative humidity. recirculation. The relative humidity “SETPOINT” (desired RH to be “AUTO” – Indicates the fan will run when the DEH 3000R calls maintained) operates the dehumidifier function of the Ultra-Aire for dehumidification or ventilation. If the control has not called dehumidifier.
The ventilation indicator “O” will be displayed whenever the unit is ventilating. The fan operation indicator “O” will also be lit. The DEH 3000R will operate fresh air ventilation according to There are three damper operation modes: your ventilation program. The control needs to be programmed 1.
Some conditions may introduce enough “CLOSED FOR” setting. Using the up/down “RH” buttons, heat to drive household temperatures up. The DEH 3000R change the duration that the damper will remain closed temperature cutout feature disables all Ultra-Aire operations if between ventilation cycles.
5.0 DEH3000R — Remote sensor option. This section is applicable only to customers who have purchased a remote sensor package. The standard DEH 3000R controller does not offer remote functionality. 5.1 Remote Sensor Usage limit sensor distance. Thicker gauges will not work with splice connectors provided.
Limited Warranty. Therma-Stor, LLC (“Therma-Stor”) warrants Customer Responsibilities. As a further condition to obtaining as follows: (i) the DEH 3000R (“Product”) will be free of material warranty coverage hereunder, the Customer must send a valid defects in workmanship or materials for a period of three (1) year warranty claim to Therma-Stor such that Therma-Stor receives (“One-Year Warranty”) following the date of initial purchase of such...
Need help?
Do you have a question about the DEH 3000R and is the answer not in the manual?
Questions and answers