Page 1
Models listed on page 3. This manual is to be used by qualified, professionally trained HVAC technicians only. Goodman does not assume any responsibility for property damage or personal injury due RT6112017r5 to improper service procedures or services performed by an unqualified person.
Disconnect ALL power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury or death. Goodman will not be responsible Installation and repair of this unit WARNING WARNING...
Page 3
WARNING that is not design certified by damage, personal injury, or death, Goodman for use with this unit. do not store combustible materials or use gasoline or Serious property damage, personal injury, reduced unit other flammable liquids or vapors in the vicinity of this performance and/or hazardous conditions may result appliance.
PRODUCT DESIGN The GSC13 SEER models are shipped with a nitrogen hold- ing charge only and are available in 1 1/2 through 5 ton sizes. They are designed for 208/230 volt single phase applications. Select GSC 3 phase models are available in 208-230V 3 phase and 460v 3 phase.
Page 5
PRODUCT DESIGN GSC130[18-60]** Dimensions Dimensions Model W x D x H GSC130181BB/DA/FA 26 x 26 x 27½ GSC130241DB/EA/FA 26 x 26 x 27½ GSC130301DB/E* 26 x 26 x 30¼ GSC130361FB/GA 29 x 29 x 30¼ GSC130421BB 29 x 29 x 30¼ GSC130481BB 29 x 29 x 34¼...
COOLING PERFORMANCE DATA PERFORMANCE TEST All data based upon listed indoor dry bulb temperature. .00 inches external static pressure on coil of outdoor section. Indoor air cubic feet per minute (CFM) as listed in the Performance Data Sheets: If conditions vary from this, results will change as follows: As indoor dry bulb temperatures increase, a slight increase will occur in indoor air temperature drop (Delta T).
WIRING DIAGRAMS GSC130[18-60]1** HIGH VOLTAGE! DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH. Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
Page 47
WIRING DIAGRAMS GSC130[18-60]1** HIGH VOLTAGE! DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH. Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
Page 48
WIRING DIAGRAMS GSC130[36/48/60]3B* - GSC130[48/60]4B* HIGH VOLTAGE! DISCONNECT ALL POWER BEFORE SERVICING OR INSTALLING THIS UNIT. MULTIPLE POWER SOURCES MAY BE PRESENT. FAILURE TO DO SO MAY CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH. Wiring is subject to change. Always refer to the wiring diagram on the unit for the most up-to-date wiring.
Need help?
Do you have a question about the GSC13 SEER and is the answer not in the manual?
Questions and answers