System Setting
While using a phone registered to a system, you can transfer to another system for connection.
To use this function, the phone should already be registered to the system.
[MENU]
8. System
2. System Setting
[OK]
[OK]
Confirm the information of the system
Inquire your system administrator for information on whether the system connected to the
phone is Sytem1~System4. To newly register a phone to System2, select System2 and register
the phone according to the 'Phone Registration' procedure described earlier.
Encryption Key
You can set the encryption key in the system which should be entered when you register the phone.
You can register the phone to the system only by additionally setting or clearing the encryption key without
having to enter the system information again.
[MENU]
8. System
3. Encryption Key
[OK]
3. WPA_PSK/4. WPA2_PSK] (Select Encryption key)
[OK]
[1. AES Mode/2. TKIP mode] (Select Encryption mode)
Enter encryption key
Consult the system administrator and enter the value set on the system.
[OK]
Enter the password
(Select system)
[OK]
Enter the password
[1. Disable/2. WEP/
[1. ASCII Mode/2. HEX mode] or
[OK]
[OK]
[OK]
[OK]
[OK]
50
Table of Contents