Am/Fm Radio With Cd Player - Chevrolet Equinox 2005 Getting To Know Manual

Getting to Know Your Equinox
10

AM/FM Radio with CD Player

Setting the Time
• Press the clock button, located on the
right side of the radio. The clock sym-
bol will appear on the display and the
hour number will flash.
• Turn the ADJ knob to set the hour.
• Repeat the above steps to set the
minutes.
Note: The time can be set with the
ignition on or off.
Radio Controls
(Power): Press this button to turn
your audio system on and off.
(Volume): Turn the power button's
outer ring to increase or decrease
volume.
AUTO (Automatic Volume): Use this
control to automatically adjust audio sys-
tem volume to make up for wind and
road noise as you drive.
DISP: When using the Radio Data
System (RDS), press the DISP button to
display various information, including
station name, RDS station frequency,
Program Type (PTY), and the name of
the program, if available.*
BAND: Press this button to switch
between FM1, FM2, AM or XM1 or XM2
(if equipped).
ADJ (Adjust): Turn this knob to select
radio stations.
Press this button's up or down
arrow to go to the next or previous sta-
tion and stay there. To scan radio sta-
tions, press and hold either arrow for
two seconds until you hear a beep.
Press either arrow again to stop
scanning.
Presetting Radio Stations
You can preset up to 30 radio stations
(six FM1, six FM2, six AM, six XM1 and
six XM2) by using the radio's six num-
bered buttons.
Preset a radio station
• Tune in a desired station.
• Press and hold one of the six num-
bered buttons until you hear a beep.
Repeat the steps for each button.
*Note: See Section 3 of your Owner
Manual for additional radio features
information, including instructions on
operating the Radio Data System (RDS).
CD Player Controls
(Previous Track): Press this button to
go to the start of the current track.
(Next Track): Press this button to go
to the start of the next track.
(Reverse): Press and hold this
button to reverse quickly within a track.
(Fast Forward): Press and hold this
button to advance quickly within a track.
RPT (Repeat): Press this button to hear
a track over again. Press the button
again to turn off repeat play.