Installation; Setting Up The Base Unit - Silvercrest COCOON M1450 TWIN User Manual

Cocoon M1450 TWIN
2

Installation

Caution
Important
2.1

Setting up the base unit

Carry out the following steps:
1. Plug the power supply plug into a 230 V socket. Plug the connector into the connector
socket on the underside of the base unit.
2. Connect the telephone socket on the underside of the base unit to the telephone
connection socket using the telephone cable provided.
1
Take note of the safety instructions regarding the environment and
circumstances of the device's location and installation. Do not use in
potentially explosive environments.
You must make sure that the batteries are charged before you use
the telephone for the first time. The device will not work at its best if
you do not do this.
3
2
1.Telephone wall socket
2.Telephone cable
3.Underside of the base unit
4.Cable from the power supply plug
Installation
4
9