(If water or liquid is allowed to enter this equipment, fire or of Japan, Limited is: electric shock may be caused.) JVC Technical Services Europe GmbH 5. DO NOT expose the apparatus to dripping or splashing. Postfach 10 05 04 6.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. [Business users] If you wish to dispose of this product, please visit our web page information about the take-back of the product. http://www.jvc.eu to obtain [Other Countries outside the European Union] These symbols are only valid in the European Union.
Page 4
DISCLAIMER OF LIABILITY licensed to provide AVC/VC-1 Video. No license is granted or JVC shall not be liable for any loss relating to the unit’s failure to shall be implied for any other use. Additional information may be properly record, store or playback any content (video, audio or obtained from MPEG LA, LLC.
Memo : States restrictions on the functions or use of this HM700/100 (only for SR-HD1500) unit. MOV files that are taken in SP mode (*1) using the JVC Note : States precautions to be taken during operation. ProHD Camcorder GY-HM700/100 are compatible with the : Indicates the page numbers or items to refer to.
Doing so may result in fire or electric shock. copyright works before using this unit in the correct manner. Under no circumstances shall JVC take any Do not insert or remove the plug with wet responsibility for any infringements of copyright caused by hands the customer when using this unit.
Getting Started Hard Disk Drive (HDD) SD Cards Hard disk drive (HDD) Precautions for handling SD and SDHC cards The HDD rotates at a high speed whenever the power is turned "On". Note: Pay particular attention to the following precautions when The disc operation display icon appears blinking and using this unit.
Getting Started Discs BD video data You can erase BD Video data from the SD card as follows. 1 Insert the SD card which has BD video data BD recording formats stored on it, into the [SD SLOT]. Memo: BDAV mode The BD video data cannot be erased if the SD card is write- Videos can be edited (chapter edit etc) and new videos can protected.
Page 10
Getting Started Discs_(Continued) Discs that enable both dubbing and playback Disc Type Recording Format Format Finalise Repeated Use (Reformat) BD-RE BDAV mode BDMV mode BD-R BDAV mode BDMV mode DVD-RW Video mode VR mode DVD-R Video mode VR mode Discs that enable playback only Disc Type Description DVD-RAM (4.7 GB)
DVD recording side of the dual disc. Use genuine JVC discs The best performance may not be obtained for some discs. It is recommended that genuine JVC discs be used to ensure the best results. Correct way to hold a disc Power Cable Do not unplug the cable during recording or playback.
Getting Started On-screen Displays Status display Displays the current settings and operating status (such as playback, pause) of this unit. Pressing the [ON SCREEN] button on the remote control displays the status. To cancel the display, press the [ON SCREEN] button again. You can select whether to display the statuses by changing the settings in the settings menu.
Getting Started Name and Function of Parts Front panel A [ A ] button N Playback control buttons Switches operation on or off. [ I ] button Plays back the data. B Disc tray [ o ] button C [ M ] button Stops playback/recording.
Getting Started Name and Function of Parts _(Continued) Display window English messages appear for a number of operations. HDD/DISC remaining level display (Examples) Dubbing display HELLO : When the power plug is inserted Disc status display READING : When reading the disc HDMI output display ONSCREEN : Upon moving to the playback navigation Memo:...
Getting Started I [ J / K / H / I ] The cursor can be moved to select an item. Remote control J [OPTION] Displays the option screen. K [ S ] Move to the chapter just before the current chapter. L [ O ] Fast reverses the video and starts slow playback.
Page 16
Getting Started Name and Function of Remote control codes Parts _(Continued) By setting a remote control code for the unit and remote control, you can prevent two recorders from operating simultaneously using the remote control for this unit. g [ N ] (the setting for the unit and remote control at time of purchase Fast forwards the video and starts slow playback.
Preparation Memo: Connecting a Monitor After connecting a component video cable, change the unit setting to “COMPONENT OUTPUT”. To display video images from this unit, connect it to a monitor. For more details, refer to “COMPONENT OUTPUT” (A page This unit supports connections using "HDMI cable", 81) .
Preparation Connecting a Video Deck Connecting an Amplifier or Other Equipment Connecting an audio amplifier Connecting a video camera Connecting using an optical digital cable Connecting via the i.LINK terminal OPEN/ CLOSE INPUT MIDIA SELECT ONE TOUCH STANDBY/ON RESET MODE SELECT BD/SD DUBBING...
Preparation Connecting External Connecting the Power Devices Supply Connect the supplied power cable to this unit as follows. Connecting a wired remote control 1 Connect the supplied power cable to the AC IN terminal of this unit Using a wired connection enables stable control of this unit from an external device.
Preparation 4 Select “CLOCK SET”, and press the [OK] button Setting and Displaying The Clock Set menu screen appears. Date/Time Set the date/time of the built-in clock as follows. The recording date/time is stored on the disc. Setting the date/time Set the date/time of the built-in clock as follows.
Page 21
Preparation 6 After setting is complete, select “ADJUST”, and 3 Select “CLOCK SET/DISPLAY”, and press the press the [OK] button [OK] button Doing so exits date/time setting, and returns to the initial The Clock Set/Display menu screen appears. screen. 4 Select “DATE DISPLAY”, and press the [OK] Memo: button The value for seconds cannot be set.
Page 22
Preparation 4 Select “TIME DISPLAY CHOICE”, and press the Setting and Displaying [OK] button Date/Time_(Continued) 5 The Time Display menu screen appears Memo: The date display style will be applied in the following information displays. Recording date of the title that is shown in the playback navigation screen (The recording date will be shown in place of the title if the title has not been input).
Make use of a BD/DVD disc that For MOV* format videos, only videos in MOV format (SP supports high-speed recording. mode) taken using JVC ProHD camcorder GY-HM700/100 Dubbing in a specific recording mode are compatible. There is no guarantee for importing videos taken on devices by other company.
Re-encoding High-speed dubbing / High-speed dubbing / Re-encoding Re-encoding Memo: MOV* : MOV files that are taken in SP mode using the JVC ProHD Camcorder GY-HM700/100 Dubbing the picture data from the HDD Importing file Media (HDD) BDAV(BD-RE) SDHC/SD JPEG...
Note: If a disc is formatted using an equipment not manufactured by JVC, the disc may not be read correctly even though it 3 Select “FORMAT” from “BD/DVD” corresponds to the chart below. DVD : A format selection screen appears.
Page 26
Dubbing/Importing Formatting_(Continued) Cancel formatting Memo: 5 Select “YES”, and press the [OK] button in the 1 Press the [OPTION] button while formatting format confirmation screen 2 Select “STOP” and press the [OK] button Formatting starts. A confirmation screen to stop formatting appears. After formatting is complete, a “THE DISC HAS BEEN 3 Select “YES”...
Page 27
Dubbing/Importing 4 Select “YES”, and press the [OK] button Formatting an SD Card 1 Insert the SD card to be formatted into the [SD SLOT] With the terminal side facing down, insert the SD card until a “click” sound is heard. Formatting starts.
HDV, MOV* and SD-VIDEO(JVC Everio MPEG2 TS) titles between XP and EP according to the remaining memory on are imported using DR mode. the disc. MOV* : MOV files that are taken in SP mode using the JVC ProHD Camcorder GY-HM700/100...
Titles of two or more scenes cannot be combined if the recording criteria, such as video size, are different. Import of MOV* files recorded using JVC GY-HM700/100 SP mode 1080i (25 Mbps) requires a duration that is about 1.3 times longer than the usual time.
Dubbing/Importing Importing Data from a BD/ Full import DVD to the HDD 1 Select “FULL IMPORT” in the import selection screen, and press the [OK] button A check mark is added to the “FULL IMPORT” item. Data can be imported from a BD/DVD to the HDD as follows. File formats that can be imported 2 Select “NEXT”, and press the [OK] button BD-MV, BD-AV, AVCHD, DVD-VR, DVD-VIDEO,...
Page 31
Dubbing/Importing 5 Select “START”, and press the [OK] button 3 Select “RECORDING MODE”, and press the [OK] button Importing of the titles starts. A pop-up menu appears. After titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor. 4 Select the “RECORDING MODE”...
Page 32
Dubbing/Importing 1 Select “RECORDING MODE”, press the [OK] Importing Data from a BD/ button, and select “RECORDING MODE” from DVD to the the recording mode selection screen Select the “RECORDING MODE” option. HDD_(Continued) 7 Select “START”, and press the [OK] button For more details, refer to "Recording Modes"...
A check mark is added to the “FULL IMPORT” item. HDD onto the SD card. 2 Select “START”, and press the [OK] button If using a JVC camcorder that has two memory card slots: Put the memory card that has the required data in slot A.
Page 34
Dubbing/Importing 4 Select “START”, and press the [OK] button Importing Data from a USB- compatible Device to the HDD_(Continued) After titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor. Importing of titles starts according to the sequence in the created title list.
4 Select “NEXT”, and press the [OK] button Import of MOV* files recorded using JVC GY-HM700/100 The import selection screen appears. SP mode 1080i (25 Mbps) requires a duration that is about 1.3 times longer than the usual time.
Page 36
Dubbing/Importing Importing Data from an SD Importing of titles starts according to the sequence in the created title list. Card to the After titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor. HDD_(Continued) Specify a title 1 Select “SEL.
The import selection screen appears. Doing so may result in loss or damage of the titles. For example, during full import of HDV content from JVC GY- Imports data from the beginning HD100 via i.LINK connection, the beginning of the image may not be captured if GY-HD100 is not set as follows.
Dubbing/Importing 3 Select “RECORDING MODE” and press the [OK] Importing Data from an button to display the pop-up menu i.LINK-compatible Device to Select "XP", "SP", "LP", or "EP" from the “RECORDING MODE” option. the HDD_(Continued) Select "XP", "SP", "LP", or "EP" from the “RECORDING MODE”...
720p during high-speed dubbing to BDAV. For ② Select “DUB”, and press the [OK] button 720p content imported from JVC GY-HM700/100 via an SD ③ Follow Steps 3 to 4 of "Preparation" card, a high-definition disc can be created by selecting high-speed dubbing to BDMV/BDAV.
Page 40
Dubbing/Importing Memo: Dubbing a Title from the Press the [MARK] button. A check mark will appear beside HDD to a BD/ the title. All titles with a check mark can be added to the list at the DVD_(Continued) same time. You can perform the following editing operations by Memo: selecting a title from the dubbing title list and pressing the...
Page 41
Dubbing/Importing ② Select “REPEAT”, and choose either “OFF” or “ON” Memo: “OFF” The background image of the disc menu can be selected (only for DVD-Video and BD-MV). The disc will stop and the menu will be displayed after all the titles are played back. The following sizes are recommended for still images.
Dubbing/Importing 4 Select “NEXT”, and press the [OK] button Dubbing Still Images from Memo: the HDD A message appears on the monitor when dubbing cannot be performed in the following cases. When this occurs, replace the disc or SD card with one that is usable. Still images stored in the internal HDD can be dubbed to a BD-RE or an SD card as follows.
Page 43
Dubbing/Importing 6 Select “START”, and press the [OK] button Dubbing from the Playback Navigation screen Dubbing can also be performed from the Playback Navigation screen. 1 Select the still images to dub, and press the [OPTION] button Dubbing starts. A progress bar is displayed during the dubbing process.
Dubbing/Importing Memo: Enabling Playback on To cancel the finalising operation, select “NO” and press Other Devices (Finalising) the [OK] button. 5 Setting the top menu items DVD-R and DVD-RW discs may need to be finalised before they can be played on other DVD players. Memo: Discs in the Video mode becomes a DVD-Video format with a title menu after finalising.
Page 45
Dubbing/Importing ③ Select “CHANGE DISC MENU BACKGROUND” to Unfinalising a disc select a background image for the top menu Only DVD-RW discs that are finalised on this unit can be You can register and use a background image of your unfinalised.
Dubbing/Importing 4 Select “NEXT”, and press the [OK] button Copying the Entire Disc The disc tray will open automatically. 5 Set the source BD or DVD on the disc tray Copying the entire disc allows all content on a BD (BDMV) or DVD (AVCHD, DVD-Video) to be copied onto another disc.
Dubbing/Importing Recording Using External 9 Complete the entire disc copying After copy is complete the tray will open automatically, and Inputs copy of the entire disc ends. Videos on an external device that is connected to i.LINK (HDV/ DV) or video / S-video input can be recorded to the HDD. BD, DVD can be recorded from the [VIDEO]/[S-VIDEO] input.
Playing a video/still image "Importing Data from an SD Card to the HDD" (A page 35) . Plays the selected video/still image. MOV* : MOV files that are taken in SP mode using the JVC ProHD Camcorder GY-HM700/100 Icon Mark name...
Page 49
Playing Back Switching between thumbnail and list Switching between video and still image displays displays You can switch between the thumbnail display and list display You can switch the display between the video thumbnail list of a video. screen and still image thumbnail screen. When the video thumbnail list screen is displayed When the video thumbnail list screen is displayed Press the [RED] button to display the title list screen.
Playing Back EDIT INFO Using Playback Navigation Switches to the menu screen of the sub-items. _(Continued) MODIFY TITLE NAME/MODIFY GROUP NAME Switches to the rename screen for the selected title/ 2 Select an operation option, and press the [OK] group name. button For details, refer to "Changing the Title/Group Name"...
Playing Back Video Playback Operation Frequently used button operations [ I ] button If the stop position (resume point) is memorized in the selected video, pressing the button plays back the video from this position. The video may not resume playback depending on the media and settings used.
Playing Back Video Playback Useful button operations Operation_(Continued) [PB MODE] button Displays the Playback Settings screen, which enables you to modify the settings. [ v ] button For details, refer to "Changing Playback Settings". During normal playback, 1.3x playback, slow motion [AUDIO] button playback, fast forward, or fast reverse, pressing the button moves the playback position forward by about 30 seconds.
Playing Back Playing Videos on a BD/ Playing an EverioBackup Disc* EverioBackup* : Data disc containing high-definition videos that are recorded in the MPEG2 format using a DVD writer for Everio. Playback starts automatically after a BD/DVD is set. If the Auto Play feature is disabled, play the title using 1 Set the disc on the disc tray Playback Navigation.
Playing Back Playing Videos on the HDD Playing Videos on a SD Card Titles stored on the HDD can be played back using Playback Navigation. Titles stored on an SD card can be played back using You can select a video to play from "Title", "Group", or Playback Navigation.
Playing Back Playing Still Images (JPEG) Enabled button operations during still image playback Still images stored on the HDD/BD/DVD/SD card can be [ I ] button played back using Playback Navigation. Pressing the button when a title/group is selected starts playback of the still images in the title/group in a slideshow.
Playing Back Changing Playback Playback settings Settings Displaying the playback settings menu 1 Press the [PB MODE] button on the remote control unit during the playback of a title The Settings Menu screen appears. The playback settings menu can only be displayed during the playback of a title.
Playing Back Video settings PROGRESSIVE OUTPUT The following items can be set. Setting Description Values AUTO1 Displays video images after they are converted according to the film material. AUTO2 In addition to the “AUTO1” option, support is also provided for progressive videos recorded at 30 frames per second.
Editing Editing Before editing This unit mainly edits video images stored on the HDD. To edit video images stored in a disc or SD card, do so after importing them to the HDD. Data on a finalised disc cannot be edited. To edit a finalised disc, you have to either unfinalise the disc, or do so after importing the data to the HDD.
Editing Entering Characters Entering characters 1 Enter characters using the [0]-[9], [Z] or [#] Names can be changed or given to stored videos or groups. buttons You can enter characters while referring to the input on the 2 After character input is complete, press the monitor.
Editing 5 Select “GROUP”, and press the [OK] button Grouping The selected titles and groups are now grouped together. Multiple titles stored on the HDD can be combined into a group. Memo: Only video data stored on the HDD can be grouped. Grouping 1 Press the [NAVIGATION] button on the remote control unit...
Page 61
Editing 4 Select “YES”, and press the [OK] button 3 Press the [OPTION] button on the remote control unit All titles within the selected group are ungrouped. A pop-up option list appears. 4 Select “DO NOT GROUP”, and press the [OK] button A confirmation screen for group exclusion appears.
Editing Changing the Title/Group Deleting a Title/Group Name Titles/groups can be deleted. When you delete a group, all titles contained within the group are deleted. The saved title/group name can be changed as follows. Memo: Memo: When a title/group is deleted from the HDD, BD-RE, or A title/group name can be added to video data stored on DVD-RW, the remaining space on the media increases the HDD, BD-RE, BD-R, DVD-RW, or DVD-R, and the...
Editing 4 Select “PROTECT”, and press the [OK] button Turning On Title/Group If only a single title was selected in step 2, a confirmation Protection screen for title protection will appear. Titles/groups can be protected. Editing and deletion cannot be performed on protected titles/ groups.
Editing 4 Select “UNPROTECT”, and press the [OK] button Turning Off Title/Group If only a single title was selected in step 2, a confirmation Protection screen for turning off protection will appear. Protection of a title/group can be turned off. Titles/groups can be edited and deleted after their protection is turned off.
Editing 5 Edit the playlist accordingly by selecting Creating a Playlist chapters from the source title according to your preference A playlist can be created from the video titles on the HDD. Edit the playlist. Playlists can only be created for titles that are stored on the For details, refer to "Editing the playlist".
Editing 4 Select “CHANGE”, and press the [OK] button Editing a Thumbnail The displayed still image now becomes the thumbnail image. Thumbnails (index images) can be changed to a still image 5 Select “CONFIRM”, and press the [OK] button according to your preference. Doing so ends the editing of thumbnails.
Editing Editing a Chapter Editing a chapter 1 Press the [EDIT] button on the remote control Creating a chapter mark for a saved title enables you to find a unit specific scene within the title. The Edit menu screen appears. Memo: 2 Select “CHAPTER EDIT”, and press the [OK] All chapter editing functions can be performed on titles...
Page 68
Editing Editing a Deleting a video chapter Chapter_(Continued) 1 Select the chapter for which you want to delete the video from the chapter edit screen 2 Press the [DELETE] button on the remote control Chapter mark insertion (divide chapter) unit 1 Play the video, and press the [W] button to stop A confirmation screen for deleting the chapter appears.
Editing 6 Select “EXECUTE”, and press the [OK] button Dividing A confirmation screen for performing dividing appears. You can select a saved title and divide it into two titles. Memo: Dividing can only be applied to titles stored on the HDD. Titles that are protected cannot be divided.
Editing Dividing_(Continued) Delete Scenes Memo: Unwanted scenes of a saved title can be deleted. To cancel the dividing operation, select “CANCEL” and Doing so helps to increase the free space on the disc. press the [OK] button. Memo: Alternatively, you can press the [RETURN] button to cancel Deleting scenes can only be applied to titles stored on the the divide operation and return to the initial screen.
Page 71
Editing ① Play the video, and press the [W] button at the point 5 Select “EXECUTE”, and press the [OK] button where you want to start the delete operation A confirmation screen for performing scene delete appears. ② Select “START”, and press the [OK] button 6 Select “EXECUTE”, and press the [OK] button Scene deletion starts.
Editing Changing the Disc Name Changing the Shooting Date/Time The name of a BD or DVD disc can be changed as follows. 1 Set the BD or DVD for which the disc name is to The date/time of the stored video can be changed as follows. be changed on the disc tray The shooting date/time of videos stored on the HDD can be 2 Press the [MEDIA MANAGE] button on the...
Editing 5 Select “ADJUST”, and press the [OK] button Mode conversion The modified shooting date/time is saved. Memo: You can convert HD quality video titles saved on the HDD if Alternatively, you can press the [RETURN] button to cancel they are recorded in the DR, AVC, AF, AN, AL, or AE mode. the shooting date/time modification and return to the initial Seamless : Seamless conversion can be performed to...
Settings Menu PCM DOWN SAMPLING ......(A page 78) Changing Settings of this Dolby Digital ..........(A page 78) Unit Dolby Digital Plus/TrueHD ......(A page 78) DTS ............... (A page 78) Settings changed in the Settings Menu screen are stored on DTS-HD ............
Displays the time in 24-hour format. REMOTE CONTROL CODE DIMMER (POWER ON) For remote control units compliant with JVC’s products, For setting the brightness of the display window when the different remote control codes can be specified for those that power is turned "On".
Settings Menu Playback Setting QUICK STARTUP For turning on/off the display window during quick startup and standby mode. Setting Description Values Starts up in the normal way. Display window turns off during standby mode. Operation is speedily enabled after turning on the power.
Settings Menu Record RESUME The stop position can be stored when playback of a BD- Video, DVD-Video, BDMV, AVCHD, finalised discs, or SD card is stopped halfway. Setting Values Description Resume information is not stored. Stores resume information. Memo: Resume information is stored at all times for other discs as well as the HDD regardless of this setting.
Settings Menu AUDIO DISC RECORDING DIGITAL OUT For changing the settings of audio to be recorded to the disc Set this item according to the device connected to the digital when in the AF, AN, AE or AL mode. audio output terminal (optical digital). Setting Description PCM DOWN SAMPLING...
Settings Menu DTS-HD Display For setting audio output to “BITSTREAM” or “PCM”. Setting Values Description BITSTREAM Use this setting when connecting a device that is able to decode “DTS-HD”. Audio input will be changed and output as “PCM”. Use this setting when connecting a device that is unable to decode “DTS- HD”.
Settings Menu HDMI OUTPUT RESOLUTION Connection Setting Description Values AUTO Automatically selects an appropriate resolution according to the connected device. 576p Fixes the resolution at 576p. 1080i Fixes the resolution at 1080i. 720p Fixes the resolution at 720p. 1080p Fixes the resolution at 1080p. Memo: MONITOR TYPE When the resolution is set to “720p”, videos are output at...
Settings Menu x.v.Colour HDMI-CEC Setting Description For setting the HDMI-CEC operation from the connected Values device. Setting Values Description AUTO Outputs x.v.Colour information with HDMI when video images that include x.v.Colour Disables HDMI-CEC. information are played back. Enables HDMI-CEC. This is applicable when an x.v.Colour compatible monitor is connected.
Others Locking the Disc Tray Turning on the Mode Lock By turning on the lock for the disc tray, the tray cannot be Turning on the mode lock disables all operations using the opened or closed using the [M] button. buttons on the unit and remote control, except for "Play"...
Others RS-232C Interface (only for SR-HD1500) Command Table only for SR-HD1500 Lower Order Higher Order Complete Error Cassette Target Play Stop Still Clear Sense Title Chapter Sense Chapter Title Date Clock Search Search Preset Preset Finalise Cancel- Disc MENU NEXT PREV Setup DOWN...
Others Command Operation Commands Commands for operating functions such as PLAY and REC on the BLU-RAY DISC & HDD RECORDER Command Description Eject: Opens/Closes tray. (BD Deck only) Plays the selected deck. FF: Functions only during playback. Activates forward search. Stops the selected deck.
Page 85
Others 80-8F 80 : Chapter Search 1st Byte 2nd Byte 3rd Byte Chapter Search Hundreds Tens Ones ASCII codes (30 - 39) 3* E.g. (012) E.g. : When searching the 12th chapter. 81 : Title Search under "ORIGINAL" 1st Byte 2nd Byte 3rd Byte 4th Byte Title Search (ORIGINAL) 30 Hundreds Tens Ones...
Page 86
Others 9F : Remote Data The remote control codes for controlling the wired remote controller via RS-232C is as shown in the following table. The codes apply to all three HDD, BD and SD deck unless otherwise stated. Code Items Remarks MENU BD/DVD Deck only...
Page 87
Others JOG +1/6 L1 COMPOSITE INPUT HDD Deck only SELECT JOG +1 PLAYBACK SETTING INSTANT REPLAY DELETE EDIT INFORMATION COLOUR KEY GREEN CORRECT COLOUR KEY YELLOW FWD FRAME NAVIGATION MODE LOCK L1 Y/C INPUT SELECT HDD Deck only B8 : Input/Output Selection 1st Byte 2nd Byte External input selection L-1 VIDEO External input selection L-1 S-VIDEO 30...
Others Subtitle Selection B8 : Subtitle Selection Byte Byte Byte Byte Byte Byte Byte Byte JAPANESE ENGLISH GERMAN FRENCH ITALIAN SPANISH DUTCH SWEDISH NORWEGIAN FINNISH DANISH "Language Code List" (A page 94)
Page 89
Others Audio Language Selection B8 : Audio Language Selection Byte Byte Byte Byte Byte Byte Byte Byte JAPANESE ENGLISH GERMAN FRENCH ITALIAN SPANISH DUTCH SWEDISH NORWEGIAN FINNISH DANISH "Language Code List" (A page 94)
Page 90
(*) CTL Data Sense: For acquiring the lapse counter when there is a media in the selected deck. (*) JVC Status Sense: Returns data from the unit. (*) (*) : See A pages 90-93 for data format.
Page 91
Others Title/Track Sense under "ORIGINAL" 1st Byte 2nd Byte 3rd Byte 4th Byte Title/Track Sense (ORIGINAL) 30 Hundreds Tens Ones E.g. (345) E.g. : When the current title under "ORIGINAL" is the 345th title. Title/Track Sense in "PLAY LIST" 1st Byte 2nd Byte 3rd Byte 4th Byte Title/Track Sense (PLAY LIST) 38 Hundreds Tens Ones...
Page 92
Others Status Data Sense For acquiring the remaining time in the current recording mode in hours, minutes and seconds for HDD/DVD. 1byte 1byte 1byte 2byte 3byte 4byte 5byte STATUS SENSE HDD/BD/SD HDD/BD/SD HDD/BD/SD HDD/BD/SD bit7 1 (Fixed) 1 (Fixed) 1 (Fixed) Video EE 0 (Fixed) During PLAY...
Page 93
CTL Data Sense Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones) Frame (Tens) Frame (Ones) E.g. (01:23:45) E.g. : When time lapse counter is 1 hr 23 min 45 sec. Frame is fixed as 0. JVC Status Sense 1byte 2byte 3byte...
Others Language Code List Code Language Code Language Code Language Afar Hindi Ossetian Abkhazian Hiri Motu Panjabi Afrikaans Hungarian Persian Akan Igbo Pali Albanian Icelandic Polish Amharic Portuguese Arabic Sichuan Yi Pashto Aragonese Inuktitut Quechua Armenian Interlingue Rhaeto-Romance Assamese Interlingua (International Romanian Auxiliary language Association) Avar...
Page 95
Others Divehi Luba-Katanga Tagalog Dutch Ganda Thai Dzongkha Macedonian Tibetan English Marshallese Tigrinya Esperanto Malayalam Tongan Estonian Māori Tswana Marathi Tsonga Faroese Malay Turkmen Fijian Malagasy Turkish Finnish Maltese French Moldavian Uighur Western Frisian Mongolian Ukrainian Fulah Nauruan Urdu Georgian Navajo Uzbek German...
Others Country Code List Code Country Name Code Country Name Code Country Name Andorra Gambia Niue United Arab Emirates Guinea New Zealand Afghanistan Guadeloupe Oman Antigua and Barbuda Equatorial Guinea Panama Anguilla Greece Peru Albania South Georgia and South Sandwich Polynesia Islands Armenia...
Page 97
Others Cook Islands Saint Lucia Chad Chile Liechtenstein French Southern Territories Cameroon Sri Lanka Togo China Liberia Thailand Colombia Lesotho Tajikistan Costa Rica Lithuania Tokelau Cuba Luxembourg Turkmenistan Cape Verde Latvia Tunisia Christmas Island Libya Tonga Cyprus Morocco East Timor Czech Republic Monaco Turkey...
If HDD, BD/DVD or SD CARD is being used for dubbing, seamless conversion seamless conversion the power will be turned off after dubbing finishes. SD-VIDEO(HD)* : SD-VIDEO(JVC Everio MPEG2 TS) Using HDMI Consumer Electronics Control MOV* : MOV files that are taken in SP mode using...
JVC Servicing Centre. Power turns off The “AUTO POWER (OFF)” setting Change the “AUTO POWER (OFF)”...
Page 100
Others Problem Symptom Action Reference Page Data cannot be The title to be dubbed is copyright Titles that are copyright-protected cannot (A page 23) imported protected. be dubbed. Select a title that is not copyright-protected. The number of titles stored in the HDD Delete or combine the titles in the HDD to (A page 62) has reached the maximum amount.
: 1.0 Vp-p, 75 K : 0.286 Vp-p, 75 K : 4-pin for HDV/DV IN : φ3.5 mm Jack Remote Input Serial Command: D-SUB 9-PIN (only for SR-HD1500EU) Component video output: : 1.0 Vp-p, 75 K CB/CR, PB/ : 0.7 Vp-p, 75 K...