Administrative Settings; Sip Settings; Access Point Name Control; Packet Data Settings - Nokia 5800 XpressMusic User Manual

Mobile phone
Hide thumbs Also See for 5800 XpressMusic:
Table of Contents

Advertisement

Available languages

Available languages

Administrative settings

Select Menu > Settings and Connectivity > Admin. settings.
To set the online time for the data call connection, select Data call. The data call settings
affect all access points that use a GSM data call.

SIP settings

Select Menu > Settings and Connectivity > Admin. settings > SIP settings.
Session Initiation Protocol (SIP) settings are needed for certain network services using
SIP. You may receive the settings in a special text message from your service provider.
You can view, delete, or create these setting profiles in SIP settings.

Access point name control

Select Menu > Settings and Connectivity > Admin. settings > APN control.
With the access point name control service, you can restrict packet data connections
and allow your device to use only certain packet data access points.
This setting is only available if your SIM card supports the access point control service.
To turn the control service on or off, or to change the allowed access points, select
Options and the corresponding option. To change the options, you need your PIN2 code.
Contact your service provider for the code.

Packet data settings

Select Menu > Settings and Connectivity > Admin. settings > Packet data.
The packet data settings affect all access points using a packet data connection.
Select from the following:
● Packet data connection — If you select When available and you are in a network
that supports packet data, the device registers to the packet data network. Starting
an active packet data connection (for example, to send and receive e-mail) is quicker
than if the device establishes a packet data connection when needed. If there is no
packet data coverage, the device periodically tries to establish a packet data
connection. If you select When needed, the device uses a packet data connection
only if you start an application or action that needs it.
● Access point — The access point name is needed to use your device as a packet data
modem to a compatible computer.
● High speed packet access — Enable or disable the use of HSDPA (network service)
in UMTS networks.

15. Share online

Share online
Select Menu > Internet > Share online.
© 2009 Nokia. All rights reserved.
81

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

5800d-1b

Table of Contents