Operating Instructions; Front Panel Controls - Bosch Divar 700 Series Quick Install

Divar 700 Series

Operating instructions

These instructions explain the purpose of the front panel keys.
The functions available can be limited by setting passwords.
Some functions may also require a software license.
An administrator has access to many more functions in the
menu.

Front panel controls

Keys
The keys on the front panel control all functions. Symbols on
the keys show the functions. Inactive keys emit an audible
beep when pressed.
Arrow keys:
Up Down Left
– move around through menu items or values when
in menu mode
– in PTZ mode, the arrow keys can be used to
control the pan, tilt, or zoom functions of the
selected camera
– moves the visible area of the selected image in
digital zoom mode
Enter key
– selects a submenu or menu item, or confirms
selections made in menus
– the selected cameo is shown full screen when
viewing video in multiscreen mode
ESC key
– press to return to previous level or to exit menu
system without saving
Full screen key
– press to go to full screen mode
Quad key
– press to go to quad mode
– in quad mode, press to toggle between the
enabled quad screens
Bosch Security Systems
Multiscreen key
– press to go to multiscreen mode
– in multiscreen mode, press to toggle between
enabled 3x3 and 4x4 screens
Digital zoom key
– zooms in on the active full screen camera display
Sequence key
– view cameras in sequence on full-screen or quad
displays
OSD key
– press to view date/time and camera information,
date/time only, or none
Right
Search key
– press to open the date/time search menu to look
for recorded images
PTZ key
– enables either pan/tilt or pan/zoom modes
Freeze key
– in live mode, press to freeze the selected image
Menu key
– opens the menu system
Help key
– press to view help
Mute key
– press to mute audio monitoring
– press to open or close the DVD drawer
– press to open the export menu; an indicator light
is located on the key
– toggles control between monitor A or B
Open/Close key
Export key
Monitor key
Operating instructions | en
Acknowledge key
– press to acknowledge an alarm event; an indicator
light is located on the key
Camera keys (1-16)
– press to see a full-screen display of the analog
video input
– press again to see a full-screen display of an IP
camera (if connected)
Pause key
– in the playback mode, press to freeze the playback
picture
Reverse key
– in live mode, press to start reverse playback of
recordings for the displayed cameras
– in playback mode, press to start or speed up
reverse playback
– in pause mode, press to step back one frame
Play key
– in live mode, press to resume playback from the
last selected playback position
– in pause or fast forward/reverse modes, press to
resume playback
Fast forward key
– in live mode, press to start playback from one
minute earlier
– in playback mode, press to speed up the forward
playback rate
– in pause mode, press to step forward one frame
Stop key
– while in playback mode, press to return to live
mode
Note:
IP camera numbering starts at 9 on an 8-channel hybrid model
and at 17 on a 16-channel hybrid model. So on a 16-channel
hybrid unit with IP cameras, camera key 1 selects analog
camera 1 and, when pressed again, IP camera 17.
F.01U.247.164 v3.4 | 2011.10
4