Oster Versa User Manual

OSTER
®
VERSa PERfORmancE
™
BlEndER
The Power to Blend Everything
SPR-051412-191
Blending Hints & Tips
Congratulations on the purchase of your new Oster
but please read all the instructions in the Instruction Manual to ensure proper use and performance.
If you have any comments, questions or inquiries about this revolutionary product, please call 1-800-334-0759.

Getting Started

Before you get started, separate the tamper, lid, filler cap, and jar. Wash in warm, soapy water. Rinse and dry well.
Note – Do not put the jar in the dishwasher.

Your Product Features and Assembly

Interlock
The unit is supplied with an interlock. This will prevent the motor from starting if the jar is
not properly placed on the base. The control knob must be in the 'Off' position when the
jar is placed on the base.
For your safety, if the jar is removed from the base during blending, the motor will shut off.
This also applies even if slightly lifted unintentionally.

Control Panel

The control panel includes a speed dial, plus 3 programmed settings and pulse. To use
the speed dial, simply turn it clockwise to choose from manual settings from 'Low' to
'High.' To use the programmed settings, you must first activate by turning the speed dial
counter-clockwise to the 'Programmed/Pulse' setting. Then select which programmed
setting you would like to use.
These settings have been optimized by time and speed to best blend most Smoothies,
Soups, and Dips/Spreads. It will stop once the cycle is complete.
When the speed dial is turned to the 'Programmed/Pulse' setting, the red light around the
pulse button will flash to indicate the unit is ready to operate. Avoid contact with blades or
moveable parts. Never operate the unit without the lid in place.

Tamper

The unit comes equipped with a tamper. This allows you to accelerate the process of very
thick and/or frozen mixtures. If food is not circulating, remove the filler cap and use the
tamper to press ingredients down into the blades.

Fuse/Overload Protection

If the unit stops working, the fuse/overload protection has kicked in. First turn speed dial
to 'Off' and unplug from the electrical outlet. Then, remove the jar from the base and free
the blade of any food obstructions. Next, press the external resettable fuse on the bottom
on the base. Wait 30-45 minutes for the unit to cool and then it will be ready to use again.
Note – Due to the power of the machine, it is normal for it to be fairly loud during operation.
© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. P.N. 155877
* This Guide is not a substitute for the Owner's Manual. Refer to this
guide only after you have read the Owner's Manual thoroughly.
Visit www.osterversa.com to find your blender's owner's manual.
® Versa ™ Performance Blender! Here are a few quick tips to get you started,
flashing
lights
Pulse
Tamper
Speed dial
Programmed
Settings
lEd lights