NEC EXPRESS5800 Configuration Manual page 12

CONFIGURATION GUIDE
4.1.2 Up to four 2.5-inch Drive
Non-RAID
RAID 0/1
RAID 5/6
NOTE:

On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.

Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.

All hard drives within a RAID array should be of the same capacity and rotation speed.

Mixing SAS and SATA hard drives in the same system is not supported.

An optional RAID controller occupies one PCI slot.
4.1.3 Up to six 2.5-inch Drive
RAID 0/1/10
RAID 5/6
NOTE:

An optional RAID controller occupies one PCI slot.

All hard drives within a RAID array should be of the same capacity and rotation speed.

Mixing SAS and SATA hard drives in the same system is not supported.
NEC Corporation
–
NEC Express5800/R110d-1E
On-board SATA
RAID Controller
Optional RAID
Controller
Revision 2.3, May 2012
Refer to
128MB Cache
Refer to
256MB Cache
Refer to
256MB Cache
Refer to
512MB Cache
Refer to
128MB Cache Refer to
256MB Cache
Refer to
256MB Cache
Refer to
512MB Cache
Refer to
Available Disk
SATA, SSD
4.2.6
SAS, SATA, SSD
4.2.7
SAS, SATA, SSD
4.2.8
SAS, SATA, SSD
4.2.9
SAS, SATA, SSD
4.2.10
Available Disk
SAS, SATA, SSD
4.2.11
SAS, SATA, SSD
4.2.12
SAS, SATA, SSD
4.2.13
SAS, SATA, SSD
4.2.14
12