Retrieving A Parked Call; Setting A Message Indication; Returning Messages - Samsung OfficeServ 100 Series User Manual

RETRIEVING A PARKED CALL

To retrieve a call that has been parked for you:
• Lift the handset.
• Dial 10 plus the station number that was announced. You will be connect-
ed to the parked call.

SETTING A MESSAGE INDICATION

When you are calling another station and no one answers or you receive a busy
signal, you can set a message indication at that station. The MESSAGE key on key-
sets will flash and standard telephones will receive special dial tone and light their
message lamp if their phone is equipped with one and they are on a 16DSL card.
• Hookflash and dial 43.
• Receive confirmation tone and hang up.
If the keyset you are calling is in the Auto Answer mode, you must use the follow-
ing procedure:
• Hang up for at least two seconds.
• Lift the handset.
• Dial 41 plus the extension number.
• Receive confirmation tone and then hang up.
NOTE: A station can have up to and including five message indications. If you
receive dial tone instead of confirmation tone, there are already five messages at
this station. Try again later.

RETURNING MESSAGES

When you see your message indicating lamp flashing if your phone is equipped
with one and
16 MWSLI card or you lift the handset and receive special dial tone, another sta-
tion has left a message for you. To return messages:
• Lift the handset.
• Dial 43. The first station that left you a message will be called automatical-
ly. If it is not answered, your message indication will remain.
• Repeat the prior step until all messages have been returned in the order
received.
• Dial tone will return to normal when all messages have been returned.
16
your phone is connected to an 8MWSLI or a