Station Tuning; Fm Reception; Presets - Tesco DAB109FD User Manual

SELECTING A DAB STATION
The stations are stored in an alphanumeric list.
To select another station
• Press the  or ‚ button to step up or down through
the station list.
The station name will be displayed with the multiplex name
and number.
Multiplex name and number
Station list
• When you find the station name you want to listen to,
press the SELECT button.
• After a short delay, the radio will tune to the station you
selected.

FM RECEPTION

Your radio can also receive FM band radio stations.
To change to the FM band
• Press the DAB/FM button.
To auto-tune to FM stations
hold the  or ‚ button to search up or down
• Press and
the band for the next station.
Searching...> will appear on the display and the radio will
start to search. Tuning will stop automatically when the next
station is reached.
To manually tune to FM stations
• Press the  or ‚ button briefly to tune up or down the
band in 50kHz steps.
STEREO/MONO RECEPTION
You can set your radio to switch automatically between stereo
and mono FM reception (AUTO mode) or to receive in mono
only (MONO mode). Setting to mono mode may improve
sound quality in areas where a weak aerial signal results in
a high level of background noise.
To switch between FM AUTO and MONO modes
• Whilst playing FM radio, press the SELECT button to
change between auto and mono modes.
The legend ' A uto' or 'Mono' will be displayed to indicate which
mode is set.
7
STATION PRESETS
DAB and FM presets
Your radio can store up to 10 of your favourite stations as
presets on both the DAB and FM bands for quick recall.
To store a preset
• Tune to the station you want to store as a preset.
• Press and hold the PRESET button.
A preset number will be displayed flashing on the bottom line
of the display.
• To choose a different preset location to store your station,
press the  or ‚ button to find your preferred preset
number, then press the SELECT button.
When you store a preset, the display will read 'PRESET SAVED'
to confirm the number you selected.
NOTE: If you choose a preset number that is already in use the
new station details will over-write the stored station.
To recall a preset
PRESET button.
• Press the
• Press the  or ‚ button to find the preset number you want.
• When you find the preset station you want, stop
browsing the preset list and the radio will tune to the
selected station.
NOTE:- Your radio may have been pre-programmed with a
selection of DAB station presets. If so, these stations will be
listed on a label fixed to the front panel.