The Format Button; The Time Button; The Reset Button - Becker GPS Navigator Operating Manual

The Format button

In the Format settings window you can
set the measurement units to be used
for times and distances.
> In the settings menu, press the
button.
The Format settings window appears.
Time
> Press the button to switch be-
tween the 12 hour clock and the
24 hour clock.
Distance
> Press the button to switch
between kilometres and miles.
> Confirm your settings by pressing the
button.

The Time button

You can select the time zone relevant for
your location in the
window. This setting is important for the
Format
correct calculation of the estimated time
of arrival.
> Press Time in the settings menu.
The Time settings window appears.
Time zone
Using the
the time zone should be set automati-
cally by the Navigation device or not (
auto time zone on
zone off ).
If the automatic function is switched off,
you can select the desired time zone by
pressing the button below
zone
.

The Reset button

You can reset the navigation settings to
Time
settings their factory settings.
The settings will then be reset. The fast
access mode data, stored routes,
blocked routes, voice and home address
are retained.
> Press the
you can set whether > Press the
The navigation settings are reset to their
Use factory settings.
or Use auto time
Use auto time
NAVIGATION MODE
Reset button.
Yes
button.
>>>
79