Installation And Setup - Vestax VCI-300 Quick Start Manual

Installation and Setup

The Vestax VCI-300 is a class compliant USB plug and play device for both
Mac and Windows and does not require any further driver installation.
1. Download and install the latest version of Serato DJ from http://serato.
com/dj/downloads
2. Connect your Vestax VCI-300 to an available USB Port.
3. Open Serato DJ.
NOTE: The Vestax VCI-300 does not require a Serato DJ license purchase.
When you first download Serato DJ you will see a license panel appear on
the right hand side.
Simply tick the box
click on which will hide this panel. Serato DJ will remember these
settings for when you next open the software.
1 2 3 4
11 12
in the bottom right hand corner, then
5 6 7 8 9 10
13 14 15
# Vestax VCI-300 Function
Control
1 AUX INPUT/THRU RCA connections for auxiliary source. AUX
signals directly to the master out.
2 AUX INPUT/THRU Hardware AUX input gain control
LEVEL
3 GROUND Connect AUX input devices requiring
grounding to prevent interference
4 PC/THRU ON SWITCH Sends the AUX and mic signals directly the
master out and disconnects the computer
output
5 MASTER OUT 1 6.5mm TRS Jack Master Outputs
6 MASTER OUT 2 RCA Master Output
7 TOUCH SENSOR Adjust level of touch sensitivity for the platters
LEVEL
8 ADAPTOR To power VCI-300 with optional DC adaptor
9 POWER SOURCE Select between Adapter, Off and USB
10 USB For connecting the VCI-300 to your computer
11 MIC IN Microphone Input Socket. Mic Signals directly
to master output
12 MIC LEVEL Hardware microphone input gain control
13 C.F CURVE Adjust slope of Crossfader
14 I.F CURVE Adjust slope of Individual Channel Faders
15 PHONES 6.5mm/3.5mm jack for headphone output