GETTING STARTED CLOCK BATTERIES This product shows the current time, and day-of-week in English, French, German, Italian, or Spanish. This unit operates with 2 x CR2032 batteries. Insert batteries before first use, matching the polarity as SET CLOCK shown in the battery compartment. Press and hold MODE for 2 seconds.
SET ALARM BAROMETRIC TREND Press ALARM to switch to Alarm display. DESCRIPTION TREND Press and hold ALARM again for 2 seconds. The Alarm settings will blink. Rising – Select the hour and minute. Press change settings. Press ALARM to confirm. Steady ACTIVATE ALARM Falling...
TEMPERATURE AND HUMIDITY BACKLIGHT Press SNOOZE / LIGHT to activate the backlight. This product can display current, minimum, and maximum temperatures and humidity percentage information. KEY LOCK SELECT TEMPERATURE UNIT The buttons may be locked to avoid accidental changes. Slide the °C / °F switch into the desired location. The To activate lock, press and hold LOCK for two switch is located inside battery compartment.
Clock display HH:MM:SS if you'd like to contact the Oregon Scientific Customer Hour format 12hr AM/PM Care department directly, please visit: Time zone PA (Pacific), MO www2.oregonscientific.com/service/support...
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against Name: Oregon Scientific, Inc. harmful interference in a residential installation. This equipment generates, uses and can radiate radio Address: 19861 SW 95th Place,...
Page 8
is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1)This device may not cause harmful interference. 2)This device must accept any interference received, including interference that may cause undesired operation. CAUTION —...
Need help?
Do you have a question about the EB313HG and is the answer not in the manual?
Questions and answers