Threading For Twin Needle - Husqvarna Platinum 730 User Manual

I earn roar Platinum
—
()
Threading for Twin Needle
I Insert a twin needle. See page 12
"Changing the needle"
2
Use a second thread spool or wind
a bobbin with the thread you are
going to use as the second upper
thread.
3
LEFT NEEDLE (RE'):
Thread the
machine as explained on page 7
and check to ensure that the thread
lies between the inner thread ten
sion discs, and inside the last thread
guide. Thread the left needle.
4
RIGHT NEEDLE
('
):
Pull up the
auxilary spool pin. Place the large
spool holder and a felt pad on the
spool pin.
5
Place the thread spool or the bobbin
with the second thread on the spooi
pin.
6 Thread the machine as before but
this thread should lie between the
outer thread tension discs, and out—
side the last thread guide. Thread
the right needle.