How To Set Up Triggertrap Mobile To Work With; Triggertrap Flash Adapter; Pulse Length; Sensor Reset Delay - Triggertrap TT-FAI User Manual

How to set up Triggertrap Mobile to work with

Triggertrap Flash Adapter

Pulse Length

The Pulse Length is the duration Triggertrap Mobile sends
a signal to your flash. When you first launch the app, you
will be greeted with a welcome screen. You will then be
taken to the Menu.
From the Menu, select Settings. On this page you will see
a box called Pulse Length. Set this to 30ms - Fast.
Once this is done, plug the Flash Adapter into your Mobile Dongle, then plug the dongle into your smart device.

Sensor Reset Delay

The sensor reset delay controls how quickly you want
your sensor to reset before taking another photograph.
You may want to consider setting a sensor reset delay
in order to minimise any accidental multiple exposures
or a strobe effect. Setting a delay of 5 seconds will cause
Triggertrap Mobile to wait 5 seconds before firing the
flash again.
Photo: Balloon Splash by Gabe Toth
Triggertrap Flash Adapter Manual | Page 6