Displaying The Bluetooth System Version; Setting The Rear View Camera; Back Up Camera - Pioneer AVH-4400BT Operation Manual

Menu operations
2 Press HOME to switch to the HOME dis-
play.
3 Touch System key.
System menu is displayed.
4 Touch Bluetooth Software Update.
5 Touch Start to display the data transfer
mode.
# Follow the on-screen instructions to finish up-
dating the software.
Displaying the Bluetooth
system version
(Function of AVH-4400BT/AVH-2400BT)
If this unit fails to operate properly, you may
need to consult your dealer for repair. In such
cases, you may be asked to specify the system
version. Perform the following procedure to
check the version on this unit.
1 Turn the unit off.
Refer to Basic operations on page 9.
2 Press HOME to switch to the HOME dis-
play.
3 Touch System key.
System menu is displayed.
4 Touch Bluetooth Version Information to
display to the version of the Bluetooth
module of this unit.
Setting the Bluetooth safe mode
(Function of AVH-4400BT/AVH-2400BT)
This setting restricts your operation for
Bluetooth device while driving.
If this mode is set to on, the following opera-
tions are not possible.
! Calling using entering phone number
mode
! All operations in the Bluetooth connection
menu
CAUTION
For your safety, safe mode must always be set
"On" while driving.
1 Display the system menu.
Refer to Introduction of menu operations on
page 37.
2 Touch Bluetooth Safe Mode on the sys-
tem menu to turn Bluetooth safe mode on
or off.

Setting the rear view camera

(back up camera)

CAUTION
Pioneer recommends the use of a camera
which outputs mirror-reversed images.
Otherwise, the screen image will appear re-
versed.
This unit features a function that automatically
switches to the rear view camera video (R.C
IN) when a rear view camera is installed on
your car and the shift lever is moved to the RE-
VERSE (R) position. (For more details, con-
sult your dealer.)
! After you set up the rear view camera set-
ting, move the shift lever to REVERSE (R)
and confirm that the rear view camera
video is shown on the display.
! Change this setting if the display switches
to the rear view camera video by error while
you are driving forward.
! To stop watching the rear view camera
video and return to the source display,
press and hold MUTE.
! Touch the RearView source icon to display
the rear view camera image while driving.
Touch the source icon again to turn the
rear view camera off. For details, refer to Se-
lecting a source using the touch panel keys
on page 10.
Section
11
47
En