Nokia 6100 User Manual page 79

Keying in the service settings manually
1. Press Menu, and select Services, and Settings.
2. Select Active service
You need to activate the set where you want to save the service
settings. A set is a collection of settings needed for making a
connection to a WAP service.
3. Scroll to the set you would like to activate and press Activate.
4. Select Edit active service
Select each of the following service settings one by one and key in all
the required settings.
• Settings' name
press OK.
• Homepage
that you want to use, press
• Session mode
• Connection security
When the connection security is On, the phone tries to use a
secure connection with the WAP service. If a secure connection is
not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, you must set the
connection security to Off.
• Data bearer
bearer, see Settings when GSM data is the selected data bearer
and Settings when GPRS is the selected data bearer below.
For pricing, connection speed and other information, contact
your network operator or service provider.
Settings when GSM data
• Dial-up number
• IP address - Key in the address, press
obtain the IP address from your network operator or service provider.
• Authentication type
• Data call type - Select
settings.
settings.
- Key in the new name for the connection set and
- Key in the homepage address of the WAP service
- Select Permanent
- Select On
- Select GSM data
is the selected data bearer
- Key in the phone number and press OK.
- Select Secure
Analogue
M e n u f u n c t i o n s
for a dot, and press OK.
or Temporary.
or Off.
or GPRS. Settings for the selected
for a dot, and press OK. You
or Normal.
or ISDN.
79