Level 1 and 2 Service Manual
6809497A15-A
4.
Insert the tip of a thin bladed knife under the display lens starting under the
Motorola logo and pry it upward.
Display lens
Figure 17. Removing the Display Lens
5.
Slide the pointed edge under the edge of the display lens to separate it from
the flip assembly and remove it from the flip assembly.
6.
Use the T-5 driver to remove the 2 flip assembly screws at the bottom of the
flip assembly. Set the screws aside for re-use unless they are damaged.
Flip screw
Figure 18. Removing the Bottom Flip Screws
January 31, 2006
Knife
Flip Assembly
Disassembly
051244o
Flip Assembly
Flip screw
052145o
33