Related Manuals for JLCooper Electronics MCS3-SP-RS422
Summary of Contents for JLCooper Electronics MCS3-SP-RS422
- Page 1 MCS3-SP-RS422 C o m p a c t J o g / S h u t t l e C o n t r o l l e r U s e r s M a n u a l...
- Page 2 MCS3-SP-RS422, MCS-3800, MCS-3400 and MCS-3000 are trademarks of JLCooper Electronics. All other brand names are the property of their respective owners. MCS3-SP-RS422 User’s Manual, Second Edition (November 15, 2005) Part Number 932099 2005 JLCooper Electronics, 142 Arena Street, El Segundo, CA 90245 USA...
-
Page 3: Table Of Contents
Care and Service............... 11 Avid Switch Protocol Event Code Table........11 MCS3-SP Pinout ............... 12 Machine Mode Commands ............13 Specifications ................14 Electrical: ................. 14 Environmental: ................. 14 Physical: ................... 14 Compliance:................14 JLCooper Electronics Limited Factory Warranty ....15... -
Page 4: Introduction
Introduction Thank you for purchasing the MCS3-SP. The JLCooper MCS3-SP Media Control Station is a remote control device for use with Avid Symphony running on Meridien hardware or, other computer based applications specifically written to support the MCS3-SP. The MCS3-SP may be used for controlling professional video tape recorders (VTRs), digital disk recorders (DDRs), and other RS-422 devices that support the Sony 9 Pin/P2 protocol. -
Page 5: Installation
Installation Configuring the MCS3-SP The MCS3-SP can operate in either of two modes, as a computer controller, meant to be attached to a computer based application such as Avid Symphony, or as a stand-alone deck controller for machines that respond to the Sony protocol for 9 pin decks. As shipped from the factory, the MCS3-SP is configured to connect to a host computer to control a software based application. -
Page 6: Connecting The Mcs3-Sp To A Deck
Connecting the MCS3-SP to a Deck Connect the supplied external power supply to the power jack on the MCS3-SP captive cable. In case a replacement supply ever is used, the power supply should be rated at 9 to 12 volts DC, 500 mA, with a center positive 2.1 mm plug. -
Page 7: Using The Mcs3-Sp
Using the MCS3-SP Using the MCS3-SP with a deck Transport Functions The transport buttons control Rewind, Fast Forward, Stop, Play, and Record. Pressing the button marked W7 causes the MCS3-SP to send a pause command. The Record button is interlocked with the Play button. -
Page 8: Jog And Shuttle Functions
Jog and Shuttle Functions The MCS3-SP has a professional jog/shuttle mechanism that incorporates the Jog and Shuttle into a single knob. To change between Jog and Shuttle operation, press the wheel. When in its upper position, it behaves as a shuttle control. As a shuttle control, the knob has center detent and rotation stops. -
Page 9: V-Stick Functions
V-Stick Functions The “V-Stick” is located to the upper right of the jog/shuttle control. It is a soft, four position switch. The switch is activated by applying pressure either left, right, toward you, or away from you. It is not necessary to press down or rotate the control. It performs the following functions: V Stick Down = Reverse 2x V Stick Left = Reverse 1x... -
Page 10: Using The Mcs3-Sp With A Host
Track Arming The MCS3-SP sends the appropriate commands for track arming analog and digital machines. When the unit is powered on, it defaults to track arming the audio tracks. The MCS3-SP can also arm Insert Video, Assemble and Timecode as well. The buttons marked F5 &... -
Page 11: Technical Information
Technical Information Specifications Dimensions: 6.5” x 7” x 3" 165.10 mm x 177.80 mm x 76.20 mm Weight: 1.81 Kg. 4 lbs. Power: 9 volts DC at 100mA Care and Service If properly cared for, your MCS3-SP should provide years of trouble-free performance. -
Page 12: Mcs3-Sp Pinout
MCS3-SP Pinout The following table details the pinout of the MS3-SP in machine mode and in host modes. U3 position “To Host” “To Mach” Ground Ground Transmit A Receive A Receive B Transmit B Ground Ground not used not used not used not used Transmit B... -
Page 13: Machine Mode Commands
Machine Mode Commands The following table details the implementation of the 9 pin/P2 protocol in the MCS3-SP. Stop 20 00 20 Play 20 01 21 Record 20 65 85 Fast Forward 20 10 30 Rewind 20 20 40 W1-W6 24 31 ff ss mm hh cs 21 12 00 33 F1 (A1 + DA1) 42 30 41 01 B4... -
Page 14: Specifications
Specifications Electrical: Operating voltage 100 – 240 Volts AC, 50 – 60 Hz, 0.45 Amps maximum Signal Interface RS-422A 2 meter attached cable 9 pin D-Subminiature male 2.1mm coaxial power connector Environmental: Operating Temperature +10°C to +40°C Storage Temperature +0°C to +50°C Operating Humidity 20% to 80% (noncondensing) Storage Humidity... -
Page 15: Jlcooper Electronics Limited Factory Warranty
JLCooper Electronics Limited Factory Warranty JLCooper Electronics ("JLCooper") warrants this product to be free of defects in materials or workmanship for a period of 12 months from the date of purchase. This warranty is non-transferable and the benefits apply only to the original owner. Proof of purchase in the form of an itemized sales receipt is required for warranty coverage.
Need help?
Do you have a question about the MCS3-SP-RS422 and is the answer not in the manual?
Questions and answers