Related Manuals for Salter PT-297
Summary of Contents for Salter PT-297
- Page 1 ENGLISH PT-297 CINTA DE CORRER MOTORIZADA ESPAÑOL MOTORIZED TREADMILL ENGLISH MANUAL DEL USUARIO OWNER’S MANUAL OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
-
Page 2: Safety Instructions
This is especially important if you are over the age of 35, have never exercised before, are pregnant, or suffer from any illness. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es... -
Page 3: Main Parts
ENGLISH 2. MAIN PARTS Console Safety Key Speed Adjustment Switch Incline Adjustment Switch Handrail Running Belt Wheel Main Frame OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es... -
Page 4: Hardware Kit
Nº 44. Safety Key (1) Nº 104. Lubricant (1) Nº 103. M6 (66 × 88) Nº 102. Combination M5 Allen Wrench & Allen Wrench (1) Phillips Head Screw Driver (1) OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es... - Page 5 5/16" x 18 x 1.5T Flat Washers (100) and 4pcs of 5/16" × 23 × 1.5T Curved Washers (101) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (102). OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
- Page 6 2pcs of 5/16" × 18 × 1.5T Flat Washers (100) and 4pcs of 5/16" × 23 × 1.5T Curved Washers (101) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (102). OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
- Page 7 Install the Outer Handlebar Covers (L & R) (129 & 130) on the Console Support (6) with the 4pcs of 3.5 × 12 m/m Sheet Metal Screws (74) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (102) and tighten them. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
- Page 8 Support (6) with the 2pcs of M5×25mm Phillips Head Screws (125) and 2pcs of M5×35mm Phillips Head Screws (126) by using the Combination M5 Allen Wrench & Phillips Head Screw Driver (102) and tighten them. NOTE: Tighten all screw after all components assembly complete. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
-
Page 9: Console Instructions
0.1 and 1 while setting the treadmill factor. Press this button while running to increase the incline. Press once each time increases one incline level. UP： OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es... -
Page 10: Function Modes
START to start the treadmill. The profile can be saved as an USER profile when the workout is finished. The USER can be adjusted whenever is necessary. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es... - Page 11 You can increase or decrease the target value as what fits you. Consulting your physician to determine the proper value before setting is recommended. Press START to begin your workout. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
- Page 12 3).Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
- Page 13 NOTE: DO NOT over lubricate treadboard. Any excess lubricant that comes out should be wiped off. NOTE: DO NOT over lubricate treadboard. Any excess lubricant that comes out should be wiped off. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
-
Page 14: Maintenance
LOST SPEED” : The signal of RPM speed has been lost. Check the imbedded magnet in front roller and the sensor together with the proper connection of the cable. OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es... -
Page 15: Parts List
Speed/Hand Pulse Complex Incline/Hand Pulse Complex Breaker On/Off Switch Frame Base End Cap Frame Base Front Wheel Frame Base Rear Wheel Cushion Handgrip Foam Foot Rail Non-Slip Rubber OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es... - Page 16 Ø6.5 × Ø25 × 1.5T_Concave Washer M5_Star Washer 5 × 2T_Speed Nut Clip Beverage Holder Assembly Beverage Holder 90~1 300m/m_Safety Switch Module W/Cable 90~3 90~5 3 × 10m/m_Sheet Metal Screw OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
- Page 17 4 × 19m/m_Sheet Metal Screw Chest Strap (Optional) 200m/m_Connecting Wire (White) Receiver, HR (Optional) 1000m/m_Connecting Cable (Lower) 300m/m_Ground Wire Copper Foil Audio Cable (Optional) Drink Bottle (Optional) OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
- Page 18 ENGLISH OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
-
Page 19: Environmental Note
MOTORIZED TREADMILL SALTER Design and quality Made in: TAIWAN Imported by Cial. SALTER, S.A. Lluis Millet, 52 08950 Esplugues de Llobregat Barcelona – Spain N.I.F.: A-08544298 OWNER’S MANUAL V. 1 ENGLISH PT-297 MOTORIZED TREADMILL This manual is available at www.salter.es...
Need help?
Do you have a question about the PT-297 and is the answer not in the manual?
Questions and answers