Setting the sleep timer
To set the sleep timer to turn off the TV automatically:
• Using the remote control
1.
Press SLEEP to display the current setting.
2.
Repeatedly press SLEEP to set the length of time before
the TV turns off.
The time length ranges from 0 minutes to 120 minutes.
0
15
30
45
• Using the On-Screen Display (OSD) menu
1.
Press MENU/ENTER, and then press
Special menu appears.
2.
Press
or
to highlight Sleep Timer.
Special
Language
English
4:3
Picture Size
Sleep Timer
0 minutes
Closed Caption
Off
Block Setting >
Bright
Backlight
MENU/ENTER EXIT
3.
Press
or
to set the length of time before the TV turns
off.
The time length ranges from 0 minutes to 120 minutes.
0
15
30
45
To cancel the sleep timer:
Press SLEEP until "0 minutes" appears.
Setting the Backlight
Your LCD TV set have a bright fluorescent light behind its
LCD panel. The light source, which is called backlight, affects
the brightness of the entire screen. In a darkened room with
proper lighting, we recommend you lower this setting before
you begin adjusting the brightness and contrast. You can
always raise it later if it proves too dim.
To set the Backlight:
1.
Press MENU/ENTER, and then press
the Special menu.
2.
Press
or
to highlight Backlight.
3.
Press
or
to select Bright, Normal, or Dark.
Special
Language
English
Picture Size
4:3
Sleep Timer
0 minutes
Closed Caption
Off
Block Setting >
Backlight
Bright
MENU/ENTER EXIT
32
60
120
or
until the
Special
English
Language
4:3
Picture Size
Sleep Timer
0 minutes
Closed Caption
Off
Block Setting >
Backlight
Bright
MENU/ENTER EXIT
60
120
or
to display
Special
Language
English
Picture Size
4:3
Sleep Timer
0 minutes
Closed Caption
Off
Block Setting >
Backlight
Bright
MENU/ENTER EXIT
0 minutes
15 minutes
30 minutes
45 minutes
60 minutes
120 minutes
SLEEP
MENU/
ENTER
Note:
•
When an instant power failure occurs,
the sleep timer settings may be
cleared.
•
To display the amount of time left until
the TV turns off automatically, press
SLEEP once.
Need help?
Do you have a question about the 20DL76 and is the answer not in the manual?
Questions and answers