Table of Contents
Advertisement
Quick Links
Mechanical Physician Scale
Installation & Operation Instructions
PN 102613
The Medical Physician scale is ideal for use in health clinics and doctors' practices for height and weight
measurement. The scale is durable, having a sturdy enameled steel body, removable slip resistant plastic cover
and retractable aluminum height rod. Rear wheels make the scale portable and easy to move from one location to
the other. These installation and operating instructions will guide the user through basic instructions on pillar
assembly, wheel installation, pillar height rod installation, and the zero adjustment of the scale.
Pillar
Frame
September 2007
Figure 1. Mechanical Physician Scale Parts Breakdown
Weight beam
Height rod
Movable wheels
(not shown)
Platform
102696
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rice Lake 102613
Summary of Contents for Rice Lake 102613
- Page 1 Mechanical Physician Scale Installation & Operation Instructions PN 102613 The Medical Physician scale is ideal for use in health clinics and doctors’ practices for height and weight measurement. The scale is durable, having a sturdy enameled steel body, removable slip resistant plastic cover and retractable aluminum height rod.
-
Page 2: Installation Instructions
Installation Instructions You will receive your Mechanical Physician Scale partially assembled. Those items that need additional assembly are: • Pillar assembly • Steelyard rod connection • Height rod installation • Wheel installation Remove all components from the shipping crate and lay out in a convenient place. Pillar Installation The pillar comes separate from the scale base and must be attached prior to use. - Page 3 Steelyard Rod Connection The steelyard rod is located inside the scale pillar. Once the pillar is attached to the scale base, the steelyard rod must be attached to the bottom of the scale. Lay the scale on a table as shown in Figure 4. Figure 4.
- Page 4 Height Rod Installation The Mechanical Physician Scale comes with a standard height rod to measure the height of the patient. Use the following steps to attach the height rod to the Mechanical Physician scale. 1. Insert the back side slotted holes of the height rod into the two bolts on the front side of the pillar as shown in Figure 6.
- Page 5 Wheel Installation The Mechanical Physician Scale comes with sturdy wheels for easy portability. To install the wheels onto the scale, use the following instructions. 1. Align the angle iron of the wheel base to the scale platform as shown in Figure 8. Figure 8.
-
Page 6: Zero Adjustment
Zero Adjustment To ensure accurate weighments, a zero adjustment should be done to the scale upon arrival and setup. To perform a zero adjustment, perform the following steps. 1. Ensure the scale is sitting on a level surface. 2. Check the eye loop area of the scale to ensure that the scale pointer is equally balanced between the eye loop area. -
Page 7: Specifications
Specifications 440 Lb (200 Kg) Maximum capacity 0.25 Lb (0.1 Kg) Graduation: 24-84" (60-212 cm) Height rod range: 0.125" (0.1 cm) Min. value of height per division: 14.75 x 10.75" (374.65 x 273.05 mm) Platform size:... - Page 8 Mechanical Physician Scale Limited Warranty Rice Lake Weighing Systems (RLWS) warrants that all RLWS equipment and systems properly installed by a Distributor or Original Equipment Manufacturer (OEM) will operate per written specifications as confirmed by the Distributor/OEM and accepted by RLWS. All systems and components are warranted against defects in materials and workmanship for two years.
Need help?
Do you have a question about the 102613 and is the answer not in the manual?
Questions and answers