Dialog 4422 IP Office
Update software
If new software has to be loaded into your phone, the display is
showing this. When new application software is available, the
following display is shown:
A new application version
is available, update? (x)
The
indicates a timer counting down from 60 seconds. If no key
x
is pressed during this time, "Yes" is selected automatically.
Note: You can speed up the procedure by pressing the
Speaker key.
Press to update the software (=Yes).
The software is loaded from the server. This takes about
60 seconds. The phone is then ready for use or ready for log on. To
log on, see section
"Log
Note: It is important that you do not disconnect the power
to the phone while the new software is being downloaded
and saved. If a power failure occurs, the software must be
downloaded again.
If you want to continue to use the previously stored setting:
Press to use the current version of the software (=No).
Start the Phone – Log On/Off
on" on page 24.
23
Need help?
Do you have a question about the Dialog 4422 and is the answer not in the manual?
Questions and answers