Removing Notebook Components (Hp Authorized Service Providers Only); Table 2-5. Removing Notebook Components - HP Pavilion zt1000 Service Manual

Removing Notebook Components
(HP Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
•
Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove the assemblies and follow the additional steps given in the table below.
Component
Antenna, wireless
Bezel, display
Card, mini-PCI
Case, bottom
Case, top
Cover, keyboard
Display assembly
Doors, docking
Technology Code ID)

Table 2-5. Removing Notebook Components

Removal Procedure
See page 2-20.
See page 2-20.
See page 2-16.
See page 2-32.
See page 2-27.
See page 2-9.
See page 2-18.
Plug-in module (page 2-5).
Hard disk drive (page 2-6).
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
SDRAM modules
(page 2-13).
Mini-PCI card (page 2-16).
Display assembly
(page 2-18).
Fan and heatsink
(page 2-22).
CPU module (page 2-25).
Top case (page 2-27).
Hinge saddles
(page 2-30).
Motherboard (page 2-32).
Additional Steps
See Figure 2-24 on page 2-35.
Removal and Replacement 2-37