Motion Detection - Lenovo px2-300d User Manual

Motion Detection

designation. At the bottom of the page, in the section labeled Exclusion Grid Settings you are able
to change the grid dimensions and clear the grid selections. To the left is an example of the motion
detection grid. In the middle of the motion detection page there are three sliding bars. The first two
bars are labeled Detection Adjustments. You can use these bars to choose the size of movements
that the camera picks up and how sensitive the camera is to these movements. The third sliding bar
is labeled System Performance. This bar controls the amount of impact that motion detection has
on the CPU.
Page | 1 5
Under the Motion Detection settings tab you will see the live feed
from the camera divided by a grid. The motion occurring in the live
feed will be highlighted in green. Using the grid overlaying the feed
you can designate areas of the grid to exclude from motion
detection simply by clicking on the square you would like to
exclude. This could also be used to create an area of interest