1. Manuals
  2. Brands
  3. DNP Manuals
  4. Projection Screen
  5. Supernova Flex
  6. Quick manual

DNP Supernova Flex Quick Manual

Hide thumbs Also See for Supernova Flex:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Installation Manual
Supernova
Installation Guide
User Guide
Service Guide
A Safety Instructions / Instructions de sécurité ······················· 2
B Required tools ····························································· 4
C Box contents ······························································· 5
D Planning ···································································· 6
E Mounting screen assembly ············································· 8
F Setting new stop positions ··············································· 14
G Remote control button functionality ··································· 16
H Communication ···························································· 17
I Troubleshooting ····························································· 20
J Cleaning ······································································ 21
K Sales & delivery terms ··················································· 22
L Planning guide ······························································ 24
™
Flex
Contents

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Supernova Flex and is the answer not in the manual?

Questions and answers

Related Manuals for DNP Supernova Flex

Summary of Contents for DNP Supernova Flex

  • Page 1: Table Of Contents

    ™ Supernova Flex Installation Guide User Guide Service Guide Contents A Safety Instructions / Instructions de sécurité ······················· 2 B Required tools ····························································· 4 C Box contents ······························································· 5 D Planning ···································································· 6 E Mounting screen assembly ············································· 8 F Setting new stop positions ··············································· 14 G Remote control button functionality ···································...

  • Page 2: A Safety Instructions / Instructions De Sécurité

    Be sure that the wall studs or other mounting fixtures are suitable for mounting the screen and … Be sure that the screen is mounted correctly and securely to the wall or the dnp warranty will be invalidated. The mains plug, extension cord, appliance inlet or power strip is used as the disconnect device, the disconnect device must remain readily operable.
  • Page 3 Assurez vous que l'écran est installé correctement et solidement au mur ou la garantie dnp sera invalidée. La prise secteur, le cordon, l’alimentation de l’appareil ou la barrette d’alimentation sont utilisés comme dispositifs de déconnexion et doivent être facile à actionner.

  • Page 4: B Required Tools

    WARNING! Do not connect power until screen assembly is completely mounted. Required tools You will need the following tools: Level Phillips screwdriver Power drill Tape measure Page 4...

  • Page 5: C Box Contents

    Box contents Box 1 Check box for: Box 1 – Screen 1 Installation manual (this document) 1 User manual 1 Screen assembly 1 Remote control 1 CR2032 3V battery 2 Wall brackets 2 #8-32 screws for securing screen to wall bracket 4 #8 x 2½”...

  • Page 6: D Planning

    Planning Planning screen location a. Locate wall studs or other structural member suitable for bracket mounting. Note: Select studs for mounting that are at least 4” [101 mm] in from end of cover. b. Leave enough clearance at ends to permit access for removing screws from shipping fixtures.
  • Page 7 Checking screen dimensions a. Determine space requirements for installation. b. Refer to section J Planning guide c. Ensure proper clearances. _____ Planning projector location a. The projector can be positioned freely on a vertical centerline, perpendicular to the screen, up to 5% above (ceiling mounted) or up to 5% below (table mounted) the image area.

  • Page 8: E Mounting Screen Assembly

    Mounting screen assembly Unpacking bracket hardware a. Unpack two wall brackets. b. Unpack mounting and securing hardware. Lifting screen from box a. Use two people to lift screen from box. b. Lift from box using the two shipping fixtures at the ends as handles.
  • Page 9 Leveling brackets a. After planning screen location... (using section J Planning guide) b. Mount wall bracket with securing screw at top of bracket. c. Locate wall brackets at least 4” [101 mm] in from end of cover. d. Level wall brackets to each other and tighten leveling screws.
  • Page 10 Mounting screen a. Leave shipping fixtures attached to ends while mounting screen assembly to wall. b. Using two people, grasp fixtures, lift (1), rotate (2), and seat (3) screen assembly into wall brackets. Warning! Be sure that screen assembly is securely seated before releasing grip.
  • Page 11 Removing fixtures a. Remove connection screws from shipping fixtures (1) and … b. Carefully remove lower part of shipping fixtures from ends of screen assembly (2). c. Upper part of shipping fixture stays on master frame (3) _____ Mount end-caps a.
  • Page 12 Attaching security clips a. Slide security clips into the cover catches at the ends of the cover. b. Be sure ends of security clips are seated in the cover catches. c. Loosely position security clips near ends of cover. _____ Seating cover a.
  • Page 13 ´ Powering up (Plug in) a. Insert the plug of the IR receiver cable into the mini-jack socket in the screen (located next to the RS-232 socket). See photo left. b. Place the infrared eye in the metal holder and ensure that good visible contact to the remote control can be obtained.

  • Page 14: F Setting New Stop Positions

    This may lead to permanent damages to the screen material and/or framing system This is NOT covered by the dnp warranty Do not break seal. Breaking seal would void the dnp warranty.
  • Page 15 CAUTION! Be careful not to lower the screen too far. If the screen is continuously lowered it will eventually reverse on the roller, which may lead to permanent damage of screen components. This is NOT covered by the dnp warranty...

  • Page 16: G Remote Control Button Functionality

    Remote control button functionality Front Rear [UP] move screen to top position [Stepwise UP] [STOP] step screen up stop screen in current position [Stepwise DOWN] [DOWN] step screen down move screen to bottom position Battery DIODE lit when 3V CR2032 button is pressed NOTE! Be aware when installing two screens close to each other or close to other equipment using the same IR communication protocol.

  • Page 17: H Communication

    Communication IR remote control See section G Remote control button functionality on how to operate the IR remote control. The remote is using a special IR protocol. Contact dnp denmark for more information. Contact closure To operate the Supernova Flex through contact closures, a pluggable terminal block connection is available.
  • Page 18 When powered up, the controller will send an initial welcome message, which includes the serial number and the firmware version. dnp denmark – Supernova Flex Serial no. 123456. FW ver. 7.8.9 User commands This section describes most common user commands in detail.
  • Page 19 : Immediately stop screen movement : List available commands i[nfo] Shows system information. Info dnp denmark – Supernova Flex Serial no. 123456. FW ver. 7.8.9 t[op] Moves the screen to the top stop position. moving to top stop position done u[p] Moves the screen one step up.

  • Page 20: I Troubleshooting

    Troubleshooting The screen will not move: Check Solution Is the power cord connected? Plug into screen and wall socket. Is power on (is green LED lit)? Turn on power Is screen at top position? Screen cannot move beyond top position. Move down. Screen cannot move beyond bottom position.

  • Page 21: J Cleaning

    Cleaning Cover / Chassis Dirty Slightly dusty Use a standard detergent for Dust with a feather duster or household cleaning – never something similar. Light vacuum harsh acidic or alkaline cleaners, cleaning is possible, but make as they may stain the frame. sure to use a fitting with bristles Take care to avoid scratching.

  • Page 22: K Sales & Delivery Terms

    3. PAYMENT. Payment shall be made by the customer at latest on the due date fixed in dnp denmark's invoice. In case of late payment dnp may add interest on the sum owing at the rate of 2% per running month from the due date. Unless otherwise agreed in writing, all deliveries will be made when dnp denmark has received payment from the customer.
  • Page 23 (1) year from date of invoice without extra cost for the customer make replacements, repair or redelivery of the parts with defects due to defective materials or workmanship.

  • Page 24: L Planning Guide

    – Skruegangen 2 – 2690 Karlslunde – Denmark Tel: +45 46 16 51 00 – Fax: +45 46 16 52 00 – dnp@dnp.dk US hotline: +1 (619) 600 2892 Page 24...

Table of Contents