Pioneer DRM-7000 Operating Instructions Manual page 43

12. Press the ESC key several times to return to user mode
and close the rear access door.
Press the ESC key
Press the ESC key
Press the ESC key
Press the ESC key
Press the ESC key
Close the rear access door
Initialization complete
As the remaining steps which must be performed may differ
depending on the changer control software being used, please
consult the manual for the changer control software being
used for further instructions.
≠
≠
≠
≠
≠
≠
≠
NOTE:
If you will replace drives without using the procedure
described above, you must be more careful not to remove
the wrong drive. In such a case, the installation procedure of
the drive is the same as that described in "How to add a
drive" (on p. 38), and note that the conditions under which
the buzzer is sounded differ slightly.
Operation
43
<DRC1184>
En