Summary of Contents for SnowPro SP 1128 HD
- Page 1 SNOWPRO SNOW BLOWER OWNER OPERATOR MANUAL 1-866-324-0688 FOR SERVICE AND INFORMATION...
-
Page 2: Information On The Identification Plate
2) General notes on safety Information on the Adjust coupling cable (See As user of this machine read these operating in- identification plate “Adjust coupling for the structions through carefully before using this ma- This information is very important for worm drive”) chine for the first time. -
Page 3: Safety Feature
Safety feature Symbols on the machine Fault Possible cause Action to take Figure 1 At various places of the machine you will Lever is not set to “CLOSE” Set choke lever to “CLOSE” find a safety and warning notice Spark-plug connector loosely Connect spark-plug Xxx X.XXX.XXX. -
Page 4: Before Using The Machine For The First Time
: Oil change every 25 hours of heavy work Assemble the machine as illustrated objects. at the end of these operating Before making any adjustments instructions. Turn off the engine Remove the ignition key and the spark-plug connector. Before using the machine Wait until the engine has cooled Troubleshooting down. -
Page 5: Maintenance Maintenance Schedule
(2) and wheels (3) must be touching the Maintenance ground at the same time. If the clearing plate is set too high, snow will be hurled Maintenance schedule backwards. If it is too low it will be worn down faster. Once a year: To set the clearing plate: Have the machine checked over and maintained by our service department. - Page 6 The details assemble step, please ground. immediately for the cause. Vibration is reference to 6.5HP type. generally a warning of trouble. Fill up with fuel and check the Work slowly and carefully, especially on oil level uneven or non-hard-surfaced paths, or when you are moving backwards.
-
Page 7: Working On Slopes
If you want to change gear, first Working on slopes release the coupling lever for the drive system (2) and then change gear with the shift lever (6). Risk of injury from machine (In some machines) tipping over The machine is fitted with Work slowly and carefully, freewheeling levers (3 and 4). - Page 8 Risk of injury Do not set the flap (2) of the throw-out chute (3) in the direction of people, animals, windows, cars and doors. Set the direction of throw 1) Push the fuel lock (under air clear) Put the throw-out chute (3) in the to “ON”...
- Page 9 sure every part is complete, if there 5) Pull slightly the starting rope are some parts missing, please contact Caution handle up until feeling anti-action, local dealer for a complement. A battery can explode if you and then make a rapid pull do not follow the correct procedure, seriously injuring anyone nearby.
-
Page 10: Replacing The Clearing Plate
Warranty identification plate at 220-230V and 50 Hz (110/60Hz). The warranty term issued by SNOWPRO -- is protected by an appropriate fuse valid in the USA and Canada. system. We remedy faults to your machine free of... -
Page 11: Maintenance Work On The Engine
Remove spring clip (4) and washer Risk of injury Caution Set machine on a secure and (5), extract spindle nut (6) from Before transportation Release coupling lever (1 the hole (7). horizontal support so that the -- Turn off the engine. and 2) before you select a caterpillar tracks no longer touch the Press gearshift arm (2) downwards,... - Page 12 (For 4.0HP) forward gear (higest figure). Checking the drive system Adjust coupling for the worm Figure 5 Having release the coupling lever(2), (For 5.5HP, 6.5HP, 9.0HP and drive push the machine forwards. 11HP) While you are pushing the machine, (For 5.5HP, 6.5HP, 9.0HP and 11HP) Figure C set shift lever (6) to the fastest...
Need help?
Do you have a question about the SP 1128 HD and is the answer not in the manual?
Questions and answers