Disassembly Instruction Upper Block - Nokia 3250 Service Manual

CMO Operations & Logistics
Training & Vendor Development
Multimedia Creation & Support
6.

DISASSEMBLY INSTRUCTION UPPER BLOCK

1. You will need the following tools: The SRT-6, metal tweezers,
a Torx plus size 6 driver, the SIM Tool, a torque driver with a torx
plus size 6 bit, and a DC Plug.
3. Gently pry open the A-COVER ASSEMBLY with the SRT-6 and
discard it. Do not use it again.
5. Release both screws in the order shown.
Service Manual 3250 RM-38
Page 9 (32)
CONFIDENTIAL
2. Unlock and remove the BATTERY COVER.
4. Push down both metal latches to unlock the snaps of the CAP-
COVER.
6. Do not mismatch these screws with the other ones.
Copyright © 2006-2007 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
05.July.2007