1. Manuals
  2. Brands
  3. HiTRAx Manuals
  4. Watch
  5. 42.7003
  6. Instruction manual

HiTRAx 42.7003 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
GUIDE
Cat. No. 42.7003
Instruction Manual
INTRODUCTION
This device is a digital product that provides altimeter, barometer, compass, altimeter data, dual time,
chronograph, chronograph data and alarm functions.
Features:
Altimeter
- 1 meter (or foot) resolution and with working range from -700 meters (-2296 feet) to 9000 meters (29520 feet).
- Graphical expression of changes provided.
- Unit in meters or feet selectable.
- 20 memories with date, time and altitude reading.
Barometer
- 1 hPa resolution and with working range from 300 hpa to 1100 hpa.
- Graphical expression of changes provided.
- Both sea level pressure and absolute pressure can be shown.
- Weather forecast.
- Temperature displayed in °F or °C selectable.
Compass
- Electronic compass providing 16 cardinal indications together with bearing in degrees.
- Declination correction provided.
Time
- 2 time modes selectable.
- Presents day of the week, day, hours, minutes and seconds (year and month can also be set).
- 12/24-hour formats selectable.
- Auto-calendar from 2000 to 2049.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 42.7003 and is the answer not in the manual?

Questions and answers

Related Manuals for HiTRAx 42.7003

Summary of Contents for HiTRAx 42.7003

  • Page 1 GUIDE Cat. No. 42.7003 Instruction Manual INTRODUCTION This device is a digital product that provides altimeter, barometer, compass, altimeter data, dual time, chronograph, chronograph data and alarm functions. Features: Altimeter - 1 meter (or foot) resolution and with working range from -700 meters (-2296 feet) to 9000 meters (29520 feet).
  • Page 2 Chronograph - 1/100-second resolution with working range up to 24 hours. - 100 memories for lap/split times stored in a maximum of 30 runs. Alarm - 2 daily alarms. - Hourly chime. Electro-luminescent backlight - 3 seconds light up EL backlight. Altimetermode with altitude change: measures every 2,5 seconds Altimetermode without altitude change (barometer mode): every 2,5 minutes Barometermode: measures every 2,5 minutes.
  • Page 3 BASIC OPERATION OF BUTTONS A: - SWITCH AMONG DISPLAYS - TAKE BEARING - STORE ALTITUDE DATA (PRESS AND HOLD) - FORWARD SELECTION OF ALTITUDE DATA - START/LAP OF CHRONOGRAPH - RETRIEVE DATA IN RUN - TURN ALARM ON AND OFF - FORWARD SETTING (SET OR CALIBRATION) B: - SWITCH BETWEEN NORMAL TIME AND DUAL TIME (PRESS AND HOLD) - SWITCH BETWEEN UNITS OF TEMPERATURE (PRESS AND HOLD)
  • Page 4 MODE CHANGE OPERATION There are 9 modes: Normal Time, Dual Time, Compass, Barometer, Altimeter, Altimeter Data, Chronograph, Chronograph Data and Alarm. Press C to change from mode to mode, hold down B to switch between Normal Time mode and Dual Time mode as in the following: Hold B NORMAL TIME...

  • Page 5: Time Mode

    TIME MODE Hold B Use C to enter Time mode. * Mode prompt “TIME” is displayed first. - There are 2 time modes, Normal Time (indicated by T1) and Dual Time ( indicated by T2), and they count up individually with the same second. - There are 3 displays for time.

  • Page 6: Compass Mode

    2. Use A (+) and B (-) to change the setting. Holding down either button scrolls the setting at high speed. 3. Press C to advance to the next setting as in the following: HOUR MINUTE SECOND YEAR 12/24H MONTH * When second digits are flashing, press A or B to reset the digits to 00.
  • Page 7 2. Rotate the product clockwise slowly for 2 complete rotations * Each rotation must last for at least 15 seconds. Keep the watch in a level position when calibrating. Do avoid close contact to metal parts or other electrical instruments, when calibrating. 3.

  • Page 8: Barometer Mode

    BAROMETER MODE Barometer mode indicator Use C to enter Barometer mode. * Mode prompt “BARO” is displayed first. - Barometer mode indicator is shown. - The barometer is of 1 hPa resolution and with work ing range from 300 hpa to 1100 hpa. - Both sea level pressure and absolute pressure can be shown.
  • Page 9 To switch between °F and °C 1. Use A or E to switch to the barometer display with temperature. 2. Hold down B until the unit indicator (°F or °C) stops flashi ng to switch temperature between °F and °C. To set sea level pressure reading 1.

  • Page 10: Altimeter Mode

    ALTIMETER MODE Use C to enter Altimeter mode. * Mode prompt “ALTI” is displayed first. - Altimeter mode indicator is shown. - The altimeter is of 1 meter (or foot) resolution an d with working range from -700 meters (-2296 feet) to 9000 meters (29520 feet).

  • Page 11: Altimeter Data Mode

    ALTIMETER DATA MODE 3 seconds or E Use C to enter Altimeter Data mode. * Mode prompt “ALTI DATA” is displayed first. - Data number, time, date and altitude reading can be retrieved. * Altitude data are shown in 2 different displays. To retrieve the altitude data 1.
  • Page 12 seconds, then the display will show the current running ti mes automatically. To measure elapsed time 1. Press A to start the chronograph. 2. Press B to stop the chronograph. * You can resume the measurement operation by pressing A. 3.
  • Page 13 * Returns to chronograph display automatically after 3 seconds or when any button is pressed. 3 segundos o pulsando cualquier botón MODO DATOS DE CRONÓGRAFO 2 second Use C to enter Chronograph Data mode. * Mode prompt “CHRO DATA” is displayed first. - Run number, date, lap/split time of each lap, best lap time and average lap time can be retrieved.

  • Page 14: Alarm Mode

    To clear all runs Hold down D until “----” is shown on the display. * All runs are cleared. ALARM MODE Use C to enter Alarm mode. * Mode prompt “ALRM” is displayed first. - There are 2 daily alarms and they can be set to refer to Normal Time (indicated by T1) or Dual Time (indicated by T2).

  • Page 15: Resetting The Product

    To turn the alarm on and off Press A to turn the alarm on (indicated by ON) and off (indicated by OFF). * If the alarm is turned on, the alarm on indicator will be shown. RESETTING THE PRODUCT Hold down A, B, C and D simultaneously, all segments will be “on”, then release the buttons and the product will be reset.

Table of Contents