Ip Camera Software - NEO Coolcam Instruction Manual

PRODUCT MANUAL
You are now going to use the software you downloaded from our site. This is called IP Camera
Tool.
IP Camera Tool will do one thing - it will locate your camera on your network and let you access
it for the first time.
Double-click IP Camera Tool and let it run. It may take a minute, but it should locate your
camera on your network.
Your camera will appear as ANONYMOUS and it will have a new IP Address that will look
similar to other Addresses on your network. The last set of numbers will be unique to the
camera.
Remember, the numbers shown here are only examples. Your network could look quite
different.
When your camera appears in IP Camera Tool, double-click it.
Your web browser should open and a login screen should appear.
Note: Your camera works best with Internet Explorer. While it will work with other browsers,
only Internet Explorer will show you ALL the options for your camera.
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524

IP CAMERA SOFTWARE

The location on your network the cam-
era found. This location may change if
you do not make it permanant, as noted
later in this manual.
NEOCAM Wireless PTZ Camera : SB-TWC360
Page 13