PIAGGIO 633234 Workshop Manual page 66

Electrical system
To ensure safety while riding, the "direction indicators control" function is connected to the odometer.
If the indicator is left on, it automatically stops after 1 kilometre travelled.
- The "engine disabled" indicator is activated by the side stand switch and by the emergency switch on
the right side of the handlebar.
- The LCD display gives a 5 digit indication for the total kilometres covered by the vehicle. It can be
expressed in kilometres or in miles: of course, this indication cannot be reset. To select the indication,
press "Trip" and "M" at the same time, then tirn the key switch to "ON"; keep these 2 buttons
pressed for more than 3" to display "SET" on the display, then the display switches from miles
to kilometres, or vice versa.
The instrument panel digital section is completed
by a liquid crystal display and 4 control buttons.
The display has 3 icons:
- Oil
- Service
- Belt
- The "Oil" icon warns the user of the need of replacing the engine oil.
- The "Service" icon warns the user of the need of servicing the vehicle.
- The "Belt" icon warns the user of the need of replacing the driving belt.
After servicing by the authorised workshop, the icon message must be reset by the "Reset" button
located in the front side of the vehicle under the headlight upper cover. The "Reset" button allows
resetting the kilometres covered and, in the case of "OIL" and "BELT" and "SERVICE", also the year
count. This count remains active even if the battery is disconnected for a short time.
To reset one of the icons, press the "Reset" button for less than a second, then on the icon
before that to be reset press "Reset" for at least 3" so as to display:
- The selectionj of the desired icon through the relevant solid light.
- The flashing of this light confirms the reset.
- For example, to reset the "Service" icon, go to "Oil" and press the "Reset" button for at least 3". To
reset "Oil", repeat the above procedure going to "Belt".
This procedure must be repeated since the selection of the icon and its reset are operations to be made
at the same time (it is not possible to view the desired function and reset by two different button pres-
sures since in this way the next icon would be reset).
Data check function
The date must be adjusted upon the vehicle delivery to the customer. This is because the clock starts
counting the year for the «Service» function. If the clock has already been started, reset the functions
ELE SYS - 66
X9 Evolution 500