Table of Contents
Advertisement
Voicemail (BT 1571)
1. If you have subscribed to BT Answer 1571 you can
press and hold
Do not disturb
This feature allows calls to be presented silently with
minimal notification. When set to On, the base and
handset ringer volumes (on all handsets registered
to the base) will be set to Off. The handset backlight
will not come on when the phone rings and the only
tones that the handset will emit are the battery low
and out of range warnings. The base call screening
volume and message alert will also be set to Off.
Turn Do not disturb on or off
1. Select Menu, scroll
press
.
2. Press
or
to select On or Off then press
to save. The chosen setting will be displayed and
you will hear a confirmation tone.
If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp
to listen to your messages.
to Do Not Disturb and
Using the phone
When set to On, the idle screen
will display Do Not Disturb.
23
- Quick Links:
- Set Answer Delay
- Reset Handset/Base Settings
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 3510 and is the answer not in the manual?
Questions and answers
why does my display keep flashing a phone receiver and how do I stop it
The flashing phone receiver icon on your BT 3510 indicates that the line is in use or a registration process is taking place. To stop it, check if another handset is using the line, ensure the phone is properly registered, and verify that the line is correctly connected. If the issue persists, try disconnecting and reconnecting the base unit.
This answer is automatically generated