Booster ES5000 User Manual

Booster ES5000 User Manual

12 volt power supply 900/1500 peak amps
Hide thumbs Also See for ES5000:

Advertisement

User's Manual
WARNING
Failure to follow instructions may
cause damage or explosion,
always shield eyes. Read entire
instruction manual before use.
R
Warning: This product contains chemicals,
including lead, known to the State of
California to cause cancer, birth defects
and other reproductive harm.
Wash hands after handling.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES5000 and is the answer not in the manual?

Questions and answers

Gary Johnson Sr
January 30, 2025

Can I get another wall charger. Mine does not have one with it?

User image 679bb52b27b9f
1 comments:
Mr. Anderson
February 10, 2025

Yes, you can purchase a wall charger for the Booster ES5000. The PWR+ charger and the Clore Automotive Booster PAC ESA218 charger are both available as replacement chargers for the ES5000.

This answer is automatically generated

Gary Johnson
January 30, 2025

It did not come with A MANUAL. ALS DOES NOT HAVE WALL CHARGER. WOULD LIKE TO HAVE YOU CONTACT ME SO I CAN GET THESE. PLEASE THANK YOU

User image 679bb668e006a
1 comments:
Mr. Anderson
February 10, 2025

You can obtain a wall charger for the Booster PAC ES5000 by purchasing a compatible replacement charger, such as the PWR+ Fast Charger, which is available online. The charger has an extra-long 6.7 ft cord and is UL listed. However, shipping restrictions may apply, so you may need to check availability for your location.

There is no information provided about obtaining a manual for the Booster PAC ES5000.

This answer is automatically generated

Betania Carvajal
February 5, 2025

I lost the starting button How can I start it?

User image 67a2cb74d4eb7
Randy James
March 25, 2025

When I plug in the wall charger the lights on the booster pac blink on and off

Summary of Contents for Booster ES5000

  • Page 1 User’s Manual WARNING Warning: This product contains chemicals, including lead, known to the State of Failure to follow instructions may California to cause cancer, birth defects cause damage or explosion, and other reproductive harm. always shield eyes. Read entire Wash hands after handling. instruction manual before use.
  • Page 2: Safety Summary

    Read and follow all safety instructions published in the vehicle's Owner's Manual. While the battery in the Booster PAC is a sealed unit with no free liquid acid, batteries being jump started with the Booster PAC unit likely contain liquid acids which are...
  • Page 3: Personal Precautions

    Do not operate with flammables such as gasoline, etc. If the Booster PAC receives a sharp blow or is otherwise damaged in any way, have it checked by a qualified service person. If the Booster PAC is leaking battery acid, do not ship it.
  • Page 4: Recharging

    With this method, the wall charger is connected to the Booster PAC through a small charging jack (pin jack), located on the rear of the unit. Recharging takes approximately 4 to 6 hours for each light that does not come on when the test button is pressed.
  • Page 5 To assess the unit’s readiness, monitor the Power Level LED’s. 5. If you are not planning to use your Booster PAC right away, you may leave it connected to the wall charger. We recommend that the wall charger remain connected to the Booster PAC when not in use.
  • Page 6: Used As Emergency Jump Starter

    PAC to the 12 Volt outlet on the vehicle, the memories can be saved. Note: To use the Booster PAC for this purpose, the chosen outlet must be live when the vehicle is turned OFF. On some vehicles, 12 Volt outlets are deactivated when the vehicle is turned OFF.
  • Page 7: Troubleshooting

    Problem: The Booster PAC is fully charged but has no power. Answer: Check where the wire meets the jaw on the Booster PAC clamp. Make sure they are well crimped. Problem: When trying to use an accessory through the 12 Volt outlet on the Booster PAC, I heard a clicking sound coming from inside the Booster PAC.
  • Page 8 TEST button. If all power indicator lights come on, it is fully charged. Question: How can I test the battery in my Booster PAC to see if it needs to be replaced? Answer: We recommend that you use a 100 amp battery load tester. Load the Booster PAC battery for 6 seconds with a 100 amp load and it should maintain at least 9 Vdc.
  • Page 9: Testing The Battery

    Begin by making sure that both clamps are securely stowed in their holsters on each side of the Booster PAC. 1. Lay the Booster PAC down on its front. On the back of the unit, locate the four screws that hold the case together (two along the left edge and two along the right edge).
  • Page 10: Warranty

    For best service and to receive periodic product updates, follow the instructions below to register your purchase: Please visit: www.cloreregistration.com Click on the Booster PAC logo Complete the information in the web form and click “submit” It’s that easy! For answers to questions concerning use, out-of-warranty service, or warranty/service...
  • Page 11 User’s Manual Clore Automotive • Kansas City, MO 64161 • www.cloreautomotive.com • 913.310.1050 Warning: This product contains chemicals, including lead, known to the State of California to cause cancer, birth defects and other reproductive harm. Wash hands after handling. © 2006 Clore Automotive, 6/06 842-270-020...

This manual is also suitable for:

Es2500

Table of Contents

Save PDF