Toshiba B-852-TS22-QQ-R Owner's Manual page 87

5. TROUBLESHOOTING
5.2 Possible Problems (Cont.)
Possible Problems
Nothing is printed on
the media.
The printed image is
blurred.
The Cutter does not
cut.
Causes
1. The media is not loaded properly.
2. The ribbon is not loaded properly.
3. A print head is not installed properly. 3. Install the Print Head properly. Close
4. The ribbon and media are not
matched.
1. The ribbon and media are not
matched.
2. The Print Head is not clean.
1. The Cutter Cover is not attached
properly.
2. The media is jammed in the Cutter.
3. The Cutter Blade is dirty.
1. Load the media properly.
⇒ Section 2.4.
2. Load the ribbon properly.
⇒ Section 2.6
4. Select an appropriate ribbon for the
1. Select an appropriate ribbon for the
2. Clean the print head using the
⇒ Section 4.1.1
1. Attach the Cutter Cover properly.
2. Remove the jammed paper.
⇒ Section 4.1.3
3. Clean the Cutter Blade.
⇒ Section 4.1.3
E5- 4
ENGLISH VERSION EO1-33055
5.2 Possible Problems
Solutions
the Print Head Block.
media type being used.
media type being used.
supplied Print Head Cleaner.