Related Manuals for Samsung SCC-833
Summary of Contents for Samsung SCC-833
- Page 1 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 44 Super WDR & Low Light Digital Color Camera SCC - 833(P) SCC - 835(P) SCC - 803P/805P Operating Instructions Part No.: AB68-00107A Printed in Korea...
-
Page 2: Table Of Contents
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 1 Operating Instructions Contents 1. Introduction ............. 2 2. Features ............3 3. Installation ............5 Precautions in Installation and Use ...... 5 Connecting Auto Iris Lens Connector ....6 Mounting lens ............7 Setting Lens Selection Switch ....... -
Page 3: Features
(High resolution type) provided due to the ideal combination of the excellent performance of the high light Power Source compression (Knee Compensation) function and • SCC-833(P)/835(P): AC 24V, DC12V the BLC (Back Light Compensation) function. • SCC-803P/805P : AC 220V ~ 240V... -
Page 4: Installation
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 4 Operating Instructions Operating Instructions Digital Line-lock 3. Installation The control and reliability has been enhanced due to the Full Digital Line Lock, which allows users to Precautions in Installation and Use adjust the Line Sync Phase. -
Page 5: Connecting Auto Iris Lens Connector
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 6 Operating Instructions Operating Instructions Connecting Auto Iris Lens Connector Mounting the Lens Prepare the Auto Iris Lens Connector, which is Loosen a screw fixing the Flange Back Adjustment supplied along with the camera. Ring by turning it counterclockwise and turn the Adjustment Ring to the “C”... -
Page 6: Setting Lens Selection Switch
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 8 Operating Instructions Operating Instructions Setting Lens Selection Switch Adjusting Back Focus When lens mounting is completed, set the Lens Although the Back Focus of the camera has been Selection Switch on the lateral side of the camera adjusted in the factory before its shipment, the according to the type of lens mounted. -
Page 7: Connecting Cable
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 10 Operating Instructions Operating Instructions The following describes how to adjust the Back Connecting Cable Focus when using a Zoom Lens. After mounting the lens and setting the Lens 1) Lightly loosen up the screw fixing the Back Selection switch, connect the prepared cable to Focus Adjustment Ring using a screwdriver. - Page 8 Operating Instructions 3) Then connect the power adapter. 4) Connect the power input cord to the AC 230V As for SCC-833/P, 835/P, connect one end of two power source. (SCC-803P/805P) lines of the power adapter using a screwdriver to the Power In Terminal of the camera as shown below.
-
Page 9: Name And Functions Of Parts
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 14 Operating Instructions Operating Instructions 4. Names and Functions of Parts Note: When the surface of the camera lens is contaminated, wipe the surface gently with a tissue for lens or a cotton cloth applied with ethanol. - Page 10 This is a connection terminal used to adjust the camera in the factory, and it can be controlled remotely using RS485 Half Duplex. REMOTE REMOTE VIDEO OUT ALARM OUT SCC-833(P), 835(P) A(TXD) B(RXD) ALARM OUT 4) Alarm Signal Output Alarm signal is generated when Motion REMOTE Detection of camera occurs.
-
Page 11: Camera Setup
Adjust V-DTL Select Posi/Nega MOTION DET cable. Select Left/Right OFF/ON--- SCC-803P/805P: Connect it to AC 230V Select Up/Down (power cable) ON--- EXIT AREA SET--- SCC-833(P)/835(P): Connect it to AC 24V/ QUIT/SAVE/PRESET (Adjust Position) DC 12V (power adapter) PRESET OFF/ON Adjust LEVEL... -
Page 12: Setup Menu
00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 20 Operating Instructions Operating Instructions Operation of the Setup Menu 1) Indication of the Main Menu Press the Setup Switch for about two to three seconds, then the Setup Menu (Main Menu) will Press the Setup Switch for two to three seconds to be shown as seen in the diagram below. - Page 13 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 22 Operating Instructions Operating Instructions A total of 12 characters can be entered. Move the character cursor to the position you want using the up/down/right/left direction switch and then press the Setup Switch. Repeat this until you have the text you want.
- Page 14 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 24 Operating Instructions Operating Instructions 3) ALC/ELC Mode (SET UP) Move the cursor to “ALC/ELC” and select CAMERA ID “ALC---/ELC---” using the right/left direction SENSE UP AUTO X12 ALC/ELC ALC--- switch. WHITE BAL (SET UP) SYNC CAMERA ID...
- Page 15 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 26 Operating Instructions Operating Instructions – Setting the Shutter Speed (ALC) First, move the cursor to the “SHUTTER” and select the Shutter Speed (16phases “OFF ~ 100K”) ON-- using the right/left direction switch. LEVEL ---- ----...
- Page 16 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 28 Operating Instructions Operating Instructions – IRIS Setting BLC Range Setting Move the cursor to “IRIS” and adjust the relevant Select the BLC Menu and move the cursor to data using right/left direction switch. “AREA SET---”.
- Page 17 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 30 Operating Instructions Operating Instructions 5) AGC MODE - When “ATW” selected, Auto White Balance Move the cursor to “AGC” and select “ON/OFF” Control is on. using the right/left direction switch. - When “AWC” is selected, White Balance Control memorized previously utilizing AWC is on.
- Page 18 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 32 Operating Instructions Operating Instructions - When “PRESET 3200K” is set, each Red and Blue 7) SYNC MODE comes out in 3200°K. Move the cursor to “SYNC” and select the - When “PRESET 5600K” is set, each RED and Blue “Power Sync (LINE---)/Internal Sync (INT)”...
- Page 19 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 34 Operating Instructions Operating Instructions - Move the selection cursor of the LINE LOCK Setting the VIDEO CONTROL MENU MENU to “V-PHASE” and adjust the line lock of - Setting RS485 ADDR (refer to the diagram below) the camera by using right/left direction switch.
- Page 20 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 36 Operating Instructions Operating Instructions – Setting H-REV (refer to the diagram below) (SET UP) Move the cursor to “H-REV” and select “ON/ OFF” CAMERA ID using the right/left selection switch. SENSE UP ALC/ELC ALC--- When “OFF”...
-
Page 21: Product Specifications
Operating Instructions Operating Instructions – Setting the LEVEL 5. Product Specifications Move the cursor to “LEVEL” and choose MOTION DETECTION LEVEL within the selected range SCC-833 / 835 using the right/left selection switch. Item Details (MOTION DETECT) Product Type Monitoring Camera... - Page 22 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 40 Operating Instructions Operating Instructions SCC-833P/835P/803P/805P Item Details Item Details Product Type Monitoring Camera Shutter Setting OFF ~ 1/100K seconds (16 steps) Broadcasting PAL STANDARD SYSTEM Motion Det. Motion detection (Alarm Out) System ID Setting Up to 12 characters...
- Page 23 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 42 Operating Instructions Operating Instructions RS-485 Remote Control This is RS-485 Protocol about keys of SCC-833. Target Address is able to change in sub menu of VIDEO CONTROL, SCC-833. Item Details Default value of target address is 0.
- Page 24 00107A SCC-833P/855P - gb 11/22/00 3:36 PM Page 44 Super WDR & Low Light Digital Color Camera SCC - 833(P) SCC - 835(P) SCC - 803P/805P Operating Instructions Part No.: AB68-00107A Printed in Korea...