Usb Update; Save To Usb - Skymaster DXH 90 Operating Instructions Manual

8. The OSD Menu – Tools
GB 38

4.4 USB Update

With this item, the receiver software can be updated.
This method is faster than updating by satellite or is
recommended if no software is available for your device
via satellite. Download the appropriate software from
www.skymaster.de and save this on the USB storage
medium (Please note the information when downloading)
4.4.1 Updating
Select the item "Allcode" in order to update the receiver
software.
4.4.2 Update file
Select the relevant file and start the update with START.
Follow the instructions on the screen and under no
circumstances switch off the device or disconnect it
from the mains. This could result in a complete failure
of the device.

4.5 Save to USB

You can save three different types of file on a USB data
carrier:
1. AllCode: The complete receiver software, e.g. in
order to archive older versions before an upgrade on
a PC. The file cannot be edited. It can only be
reloaded. After saving, you should add a date to the
specified file name, e.g. "M3602AllCode.abs" is
changed to "M3602AllCode_2009_07_19.abs".
2. Radioback: No function
3. defaultdb (programme and satellite list):
save the complete programme and satellite list on a
USB data carrier, copy it to a PC and edit the
sequence and many other properties. The edited
programme list can be conveniently loaded via the
option "Upgrade via USB". You can download the
editor for the programme list from our Internet site
www.sm-electronic.de · Service · Download-Center
You can