Related Manuals for iLive ITB283B
Summary of Contents for iLive ITB283B
- Page 1 USER’S GUIDE V: 883-01 ITB283B Bluetooth 32” HD Sound Bar For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com...
-
Page 2: Warnings And Precautions
Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: TO REDUCE THE RISK OF CAUTION ELECTRIC SHOCK, DO NOT REMOVE RISK OF ELECTRIC SHOCK WARNING: To reduce the risk of fire or electric shock, do DO NOT OPEN COVER (OR BACK). -
Page 3: Important Safety Instructions
Important Safety Instructions Read these Instructions. FCC Warnings Keep these Instructions. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the Heed all Warnings. user’s authority to operate the equipment. Follow all instructions. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Do not use this apparatus near water. -
Page 4: Itb283B
ITB283B Features Includes • 37” length • RCA stereo audio inputs • Remote control: requires a • Supports Bluetooth v2.0 • LED source indicators CR2025 battery (pre-installed) • Supports Enhanced Data Rate • LED pairing indicator • RCA stereo audio cable (EDR) •... -
Page 5: Table Of Contents
ITB283B . . . . . . . . . . . . . . . . . . . . -
Page 6: Introduction
Introduction Stereo RCA Audio Inputs Optical Input DC Power Input Power Press to turn the unit on or off. Source Press to switch between Optical, Pairing Line In, AUX, and Bluetooth modes. Press to begin PAIRING pairing with a Volume Bluetooth device. -
Page 7: Remote Control
Power Press to turn the Press to switch to unit on or off. Bluetooth Mode. Optical Mute Press to switch to Press to mute the volume. Optical mode. Line Press to switch to AUX mode. Press to switch to Line In mode. Talk TALK Press to switch to the EQ... -
Page 8: Audio Inputs
Audio Inputs Using the Stereo RCA Inputs When connecting two products using an RCA Cable, match the colored ports with the same colored connection. Before use, disconnect any cables connected to the Line In. 1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on the television. -
Page 9: Line In
Line In Using the Line In 1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit. 3.5 mm audio input cable not included. Before use, disconnect any cables connected to the Stereo RCA Inputs. 2. -
Page 10: Bluetooth
Bluetooth Pairing a Bluetooth Device for the First Time 1. Power on the unit by pressing the Power button. 2. Press the Source button repeatedly to enter Bluetooth mode, indicated by a blue light. 3. Press the Pairing button on the side of the unit. The Pairing Indicator will flash blue quickly. -
Page 11: Bluetooth
Bluetooth Playing Audio Wirelessly 1. Follow the instructions for Pairing a Bluetooth Device. 2. Use the native controls on the connected Bluetooth Device to select a track. 3. To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device. -
Page 12: Company Information
Company Information International Support Green Initiative To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a Environmental Commitment to ‘Protect for Today preguntas frecuentes, visite la sección de apoyo en: and Sustain for Tomorrow’...
Need help?
Do you have a question about the ITB283B and is the answer not in the manual?
Questions and answers
How to remove moise on the speaker when the television is showing
To reduce noise from the iLive ITB283B speaker when the television is on, use the Optical Input correctly:
1. Ensure you use a Digital Optical Audio Cable (not included).
2. Connect the cable from the television’s Optical Audio Output to the speaker’s Optical Input.
3. Power on the speaker by pressing the Power button.
4. Press the Source button repeatedly until SPDIF Mode is selected (indicated by an amber light).
5. On the television, set the audio output settings to PCM or Optical Audio and ensure they are turned on.
Properly configuring the audio settings should help minimize noise.
This answer is automatically generated