Table of Contents
Related Manuals for Tube Technology Fusion HB70
Summary of Contents for Tube Technology Fusion HB70
- Page 1 FUSION HB70 HYBRID INTEGRATED AMPLIFIER ~USERS MANUAL~ First edition published March 2001 © Tube Technology UK 2001 PART No. hb70/M-01 Printed in Great Britain ' Fusion ' & ' Tube Technology ' are Trade- marks of Tube Technology UK...
- Page 2 Introduction Thank you for selecting the FUSION HB70 Amplifier from Tube Technology. Please read through this manual so you will know how to operate your Fusion HB70 properly. After you have finished reading this manual, please put it away in a safe place for future reference.
-
Page 3: Table Of Contents
Contents Getting Started Unpacking the Fusion HB70 Amplifier Mains Connection Connecting the Fusion to a Household Mains Supply Wiring a Mains Plug - UK Audio Connection Connecting the Fusion HB70 Operating your System Controls & Remote Functions Installation Installing & Ventilation of your Amplifier... -
Page 4: Getting Started
Started This chapter contains information on; Unpacking the Fusion HB70 Amplifier Your Fusion HB70 is packed in "jiffy-cell" end-caps. Grip the unit from the middle and Unpacking simply pull it out of the box. Remove the end-caps and polythene bag. -
Page 5: Mains Connection
Connecting the Fusion to a Household Mains Supply Wiring a mains plug (UK) Your Fusion HB70 Amplifier plugs into the mains supply via the IEC socket located on the Mains back panel (see diagram 3). Connect your Amplifier to the wall socket using the IEC mains Connection lead supplied in the packaging. -
Page 6: Audio Connection
Audio Connection This chapter contains information on; Connecting the Fusion HB70 Amplifier Your Amplifier uses high quality connectors to ensure that maximum signal transfer is possible, therefore ensure that all cables used for connection to the amplifier are terminated with connectors of similar quality. -
Page 7: Operating Your System
Numbers in the circles relate to the Front Panel - Diagram 2 Letters in the ellipses relate to the Remote Control Handset - Diagram 3 Switch on the Fusion HB70 by pressing the rocker MASTER SWITCH(9) diagram 1 located Switching on the rear panel, to ON . - Page 8 Diagram 3 Operating your System - 8...
-
Page 9: Installation
Dedicated racks are available for housing your tube equipment, contact your dealer or Tube Technology for further information. Do not locate the Amplifier close to radiators or any other heat source, this could increase the operating temperature. -
Page 10: Maintenance
Maintenance This chapter contains information on; Care and Cleaning of your CD Player Vacuum Tubes Care & Anodised parts such as the front panel & Lid are best cleaned with a damp cloth then Cleaning buffed with a dry cloth. Stubborn 'greasy' marks in the grain can be removed with a tiny amount of washing-up liquid worked into the grain and then carefully cleaned with a damp cloth. -
Page 11: Troubleshooting
Symptom Remedy Troubleshooting No Power when the POWER button is 1. Check you have pushed the IEC mains cable depressed. firmly into the socket on the rear panel. 2. Check that MASTER POWER switch on the rear panel is in the ON position. No Sound is heard 1. -
Page 12: Specifications
Specifications Specifications - 14... -
Page 13: Guarantee
If a tube is found to be defective it should be returned to the dealer or failing this, directly to Tube Technology packed in its original packaging. Please complete the registration card and return it to Tube Technology. Your guarantee is Registration invalid without registration.
Need help?
Do you have a question about the Fusion HB70 and is the answer not in the manual?
Questions and answers