Table of Contents
Advertisement
Wired Remote (HH1) (Included)
This is the controller that comes with the Hurricane™ Haze. There are 3 functions of this remote. Please see
the below instructions for details on each of these operations.
Timer Function
1)
Plug in the haze machine to power and turn the power switch to the fixture on.
2)
Plug in the timer remote to the Manual Controller socket on the rear of the haze machine.
3)
Press the <TIMER ON/OFF> button on the timer remote. The LED above the button should light, indicating
activation of function.
4)
You may now set the INTERVAL & DURATION adjustment knobs to the desired position.
Manual Function
1.
Press the <MANUAL> button, and the haze machine will output haze for as long as you hold down the
button, at full blower speed and 100% output.
Continuous Function
1.
Press the <CONTINUOUS> button.
2.
Adjust the <OUTPUT ADJUSTMENT KNOB> to desired position.
Note:
The <INTERVAL> and <DURATION ADJUSTMENT KNOBS> will have no effect while the
CONTINUOUS function is activated.
Note:
The blower fan remains at full and the <OUTPUT ADJUSTMENT KNOB> controls the haze
output.
Interval
adjustment
Output
adjustment
Timer active
LED
Timer on/off
button
Hurricane™ Haze User Manual
Note: The< INTERVAL> is the time in between bursts of haze.
Note: The <DURATION> is the time that the haze machine will run during the burst.
7
Duration
adjustment
Continuous
LED
Manual/ready
LED
Manual
button
Continuous
button
4/20/2010 4:41 PM
Advertisement
Table of Contents
