Resetting Thermal Fuse - Dualit Vario Instruction Manual & Guarantee

RESETTING ThERMAL FUSE

If the toaster neon illuminates, but the elements fail to warm up or if there is an audible
'click' above the normal ticking of the timer from the toaster while it is still operating, you
may have activated the Thermal Protection Device.
Before resetting you must ensure that there is not a fault within the appliance. Do not
reset unless a qualified electrician has examined the toaster and verified that the
Selector Switch, Timer and all other Components are in good working order.
The Thermal Protection Device can be reset by allowing the toaster to fully cool,
unplugging the toaster from the wall socket and following instructions below.
Resetting the Thermal Protection Device should only be carried out by a qualified
electrician. The toaster must be Portable Appliance Tested following reset of the
Thermal Protection Device. Should you require any further assistance call Dualit's
Service Department on 01293 652 500.
1
Unplug the toaster
and allow to fully cool.
4
The fuse is reset by
depressing the small white
button on its face.
2
Remove the crumb tray
and toaster base plate to
access the fuse.
5
Refix the base plate and
return the crumb tray.
17
3
The fuse can be located in
the rear corner of the
toaster body.
6
pORTABLE
AppLIANCE
TEST
The appliance must be
portable Appliance Tested
before use.