Epson Stylus Photo 890 Basic Manual page 74

5. Select these settings:
Roll Paper
(3 mm) at the beginning and end of your image
Banner
Click the
name the size, and click
Paper Size setting.
6. Click
OK
7. Select
Print
8. On your print settings dialog box, select either
Photo Paper
you've loaded. See page 37 for information about selecting the correct Media
Type.
9. Make sure the PhotoEnhance setting is turned off.
10. Click
Print
0.12-inch (3 mm) margins at the beginning and end of your image. Follow the
steps on page 70 to remove and store your banner.
68
as the Paper Source; this leaves a margin of at least 0.12-inch
as the Roll Paper Option
button and enter the size of your panoramic or banner,
Customize
OK
If you want to print a cutting line at your page boundaries, select Cut
Sheet Mode, then click the Print page frame checkbox.
.
from the File menu.
You may see a Photoshop warning indicating that the image is larger
than the printable area. Click Proceed.
as the Media Type setting, depending on the type of roll paper
. Your banner prints with a 0.8-inch (20 mm) leading edge and
The spaces between images or print jobs on roll paper may vary
depending on the application you're using and the way you create
your document.
. The custom size is automatically selected as the
Photo Paper
or
Premium Glossy