Upgrade The Firmware; To Format The Mp3 Player - Logik MP3-128 LCD User Manual

Portable mp3 player
Table of Contents

Advertisement

Upgrade the Firmware

The firmware in the player can be updated through the Firmware Download utility running on your
PC. To update the firmware, run the Firmware Download utility. The MP3 Player
installed to use the Software Utility.
1. Plug the MP3 Player into the USB port of your computer. The built- in LCD will display
"READY", indicating that the MP3 Player is in USB mode.
2. To run the Player Update utility go to: Start > Programs > SigmaTel MSCN Audio Player >
Firmware Download.
3. Check the Current Firmware Version and Upgrade Firmware Version. If you are sure it is
the correct version to update, click on the Start button.
4. The firmware will be transferred to the player. Please wait until it has finished.
5. Click on the Close button to exit.
Format Data Area option: When not selected (default): Updates the firmware only. If
selected( recommended): Updates the firmware and formats the storage space.

To Format the MP3 Player

1. Connect the MP3 Player to the computer.
2. Format the MP3 Player (removable disk) using the Windows format tool.
Note: Do not select NTFS from the File System menu. Otherwise, the MP3 Player can not
work and you will need to format it again.
Removing the MP3 Player from your computer
Windows Me, 2000 & XP user:
1. Click on the Safely Remove Hardware icon
2. Click on Safely remove USB Mass Storage Device.
3. Wait until a Safe to Remove Hardware message is displayed.
4. Remove the MP3 Player.
Windows 98/98SE user:
1. Please wait until the player LCD displays "IDLE" for a moment.
2. Remove the MP3 Player.
in the taskbar (next to the clock).
driver
must be

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP3-128 LCD and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Mp3-256 lcdMp3-512 lcd

Table of Contents