Amer.com SS3GR50i Configuration Manual page 19

Admin mode to prevent unauthorized access and malicious modification to the switch.
1.2.2.3 Global Mode
Type the config command under Admin Mode will enter the Global Mode prompt
"Switch(config)#". Use the exit command under other configuration modes such as Interface
Mode, VLAN mode will return to Global Mode.
The user can perform global configuration settings under Global Mode, such as MAC Table, Port
Mirroring, VLAN creation, IGMP Snooping start, GVRP and STP, etc. And the user can go further
to Interface Mode for configuration of all the interfaces.
1.2.2.4 Interface Mode
Use the interface command under Global Mode can enter the interface mode specified.
SS3GR50I/26I series Switch provides three interface type: VLAN interface, Ethernet port and
port-channel, and accordingly the three interface configuration modes.
Interface Entry
Type
Type interface
VLAN
Interface vlan <Vlan-id>
command under
Global Mode.
Ethernet Port Type interface
ethernet
<interface-list>
command under
Global Mode.
Type interface
port-channel
port-channel
<port-channel-nu
mber> command
under Global
Mode.
1.2.2.5 VLAN Mode
Prompt
Switch(Config-if-V
lanx)#
Switch(Config-
ethernetxx)#
Switch(Config-if-
port-channelx)#
Operates Exit
Configure Use the exit
switch IPs, etc command to
return to
Global Mode.
Configure Use the exit
supported command to
duplex mode, return to
speed, etc. Global Mode.
of Ethernet
Port.
Configure Use the exit
command to
port-channel
related return to
settings such Global Mode.
as duplex
mode, speed,
etc.